Contribute
Register

[Guide] ASUS Zenbook UX310UA (& UX310UQK) macOS Mojave / Catalina with Clover (& Big Sur / Monterey using OpenCore EFI) Installation Guide

Status
Not open for further replies.
I'm having trouble understanding how to use the supported codecs. I'm supposed to use a different entry for my layout-id right? What should I put instead?
yes, try 3
 
Set the type to String first then 3?
keep it as data, use plistpro or propertree to edit 01000000 to just 3, save reboot, reset nvram and test

3 may or may not work though so you may have to test the other layout id numbers
 
keep it as data, use plistpro or propertree to edit 01000000 to just 3, save reboot, reset nvram and test

3 may or may not work though so you may have to test the other layout id numbers
Propertree is not allowing me to put only 3, it says that

Hex data must contain an even number of chars.
 
Propertree is not allowing me to put only 3, it says that

Hex data must contain an even number of chars.
ahh ok, try changing it to Number first
 
you will have to try all the other layouts
Got it to work :) apparently I had to set the child name for the proper name where the Audio controller is located on the PCI map. I used the gfxutil tool to determine what it is and changed it to Pci(0x1f,0x3) on my config.plist. Then I set the layout ID to 3 just like you said :) thank you so much!!!
 
I am having problems when I upload files. Anyone having the same problem too?
 
(Solved) Touchpad on Monterey not working? any solution?
 
Last edited:
Status
Not open for further replies.
Back
Top