[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[Inqnuam]

We don't allow ****** links. See Rules.

I can't find that rule in Rules -> Posting
Maybe this ?:
"Any posts containing links to external file/photo sharing sites will be removed. Please attach any and all attachments to your posts."

 

[ModBot]

I can't find that rule in Rules -> Posting
Maybe this ?:
"Any posts containing links to external file/photo sharing sites will be removed. Please attach any and all attachments to your posts."

Posts that gets flagged as moderated is due to them containing content that contains links or content that violates tonymacx86 community rules.

Any post containing content that violates any tonymacx86 community rule as defined on this page will be edited by a moderator to remove the inappropriate content or removed from public view without warning.

 

[yabusa]

How did you do? If I turn off the monitor, the windows don't move ...

What macOS and OC do you have?

 

[jjsenecal]

Made a couple of adjustments to my rig for better temps. I moved my NZXT Kraken X73 to the top of my o11-D case with the fans exhausting, and added 2 sets of 3 LianLi SL120 UNI fans as intakes idling at 980rpm. Now my CPU hovers between 35° and 38° C Package temp with all my normal (work) apps running. Overall it's still super quiet. I also updated to Big Sur 11.5.2. Sorry for the glare on the second picture .

 

[khaoskosmos]

@CaseySJ

I updated to the latest open core (0.7.2) and MacOS... and no more USB issues.

 

[CaseySJ]

Made a couple of adjustments to my rig for better temps. I moved my NZXT Kraken X73 to the top of my o11-D case with the fans exhausting, and added 2 sets of 3 LianLi SL120 UNI fans as intakes idling at 980rpm. Now my CPU hovers between 35° and 38° C Package temp with all my normal (work) apps running. Overall it's still super quiet. I also updated to Big Sur 11.5.2. Sorry for the glare on the second picture .

View attachment 526893View attachment 526894View attachment 526895View attachment 526896

Speaking of updates, I recently replaced my Netgear Orbi WiFi 5 mesh router with two Linksys Atlas Max 6E nodes. The Tx rates on all of my Fenvi cards (WiFi 5) increased substantially. The speed on a new laptop with built-in WiFi 6 is, of course, stellar. There appear to be a couple of minor issues with the current Atlas Max 6E firmware:

• With WPA3, iOS devices required reentry of the WiFi password two or three times.
• With USB 3 SATA SSD connected to USB 3 port on main Atlas node, the router seemed to eject and reconnect the USB drive periodically.

Next on the agenda:

• Boot macOS with OpenIntelWireless drivers and check WiFi 6 speed of AX201.

Overall, very satisfied with the Atlas Max 6E.

 

[yapiyapo]

What macOS and OC do you have?

i have 11.5.1 (20G80) and 0.7.2

 

[CaseySJ]

...
Next on the agenda:

• Boot macOS with OpenIntelWireless drivers and check WiFi 6 speed of AX201.

...

Update:

• OpenIntelWireless 2.0.0-stable (not alpha) drivers were released 7 days ago.
• They do not appear to support 802.11ax (WiFi 6) on the Z490 Vision D's Intel CNVi WiFi 6 (AX201).
• Even on 802.11ac (WiFi 5), OpenIntelWireless is much faster than Fenvi.
  • Fenvi FV-T919 = 260 Mbps
  • Intel AX201 = 520 Mbps

​

On a new Windows laptop with WiFi 6 (160 MHz) connected to the same new Atlas Max 6E. This shows the potential of WiFi 6 over WiFi 5.

​

 

[Stork]

...

​

I'm getting Tx Rate: 1300Mbps on my Fence FV-T919. Why is your speed so low?

 

[CaseySJ]

I'm getting Tx Rate: 1300Mbps on my Fence FV-T919. Why is your speed so low?

This particular system (Z490 Vision D) has a Fenvi with locally attached antennas. My Designare Z390 has an outboard antenna so WiFi runs faster, but it has never attained a speed anywhere close to 1300 Mbps! Both systems are at least one room away from an Atlas node.

What is the make/model of your router? Is it located in the same room?