Contribute
Register

[Guide] Lenovo Z50-70/Z40-70/G50-70/G40-70 using Clover UEFI

Because with the actual trackpad drivers gestures work but physical buttons not and that's impossible o drag and drop.
should be fine as 3 finger drag doesn't require button to be pressed
 
Could you send me a photo of where you made that change, because im not able to find it.
Snip20210622_1.png

click the trackpad options
 
  • Fixed brightness keys. SSDT was here already, for renames I have to credit again dandelionclock's guide.
    To get the keys working you have to enable SSDT-XOSI.aml and _OSI to XOSI patch in config.plist I had to disable them because I have a triple boot setup and SSDT-XOSI causes issues when booting windows (any help is appreciated)
Thanks for your work.
I have a quadruple boot setup (W10, W11, macOs and ubuntu). I solved using an unofficial version of OpenCore that disables the patched ACPI injection on the other OSes.
 
Is this guide also good for catalina or big sure? Thank you.
 
You can follow the guide to create the installation usb and complete it with my EFI. It should be enough to install BigSur
OK thank you very much. I try.
 
You can follow the guide to create the installation usb and complete it with my EFI. It should be enough to install BigSur
Thanks so much :). Everything works fine, but I have Catalina installed, I didn't have Big Sure installer.
Just two other things.
1) If I leave the pendrive inserted, osx starts otherwise it does not
2) The serial number is all 00000000
is there any way to change it? Thank you
 
Back
Top