pastrychef's Asus ROG Strix Z370-G Gaming (WI-FI AC) build w/ i9-9900K + AMD 6600 XT

[pastrychef]

Thanks!
I'll check WhateverGreen.
The verbose log scrolls out incredibly fast, too much to read.
Is it written somewhere?

Thanks.

You can use your phone to video the boot process and then pan through it to read the text afterwards.

 

[Huitzilopochtli]

I would check on that connection to make sure it's working reliably.

but this only happens after sleep.

 

[pastrychef]

but this only happens after sleep.

Make sure the USB port it's connected to is set to 255 in your USB fix.

 

[Huitzilopochtli]

Make sure the USB port it's connected to is set to 255 in your USB fix.

Ok, I‘ll have to look into this. You set up the usb fix for me a couple of years ago. I have never changed it, and never had any problems since the last oc bios, or maybe it has to do with some changes within the latest apple software update. But thanks for your help.

 

[pastrychef]

Ok, I‘ll have to look into this. You set up the usb fix for me a couple of years ago. I have never changed it, and never had any problems since the last oc bios, or maybe it has to do with some changes within the latest apple software update. But thanks for your help.

I'm still using the same USB fixes on all my builds with no issues. However, I also don't have any internal hubs...

 

[bruttonero]

You can use your phone to video the boot process and then pan through it to read the text afterwards.

I got it to work with-lilubetaall.

The only problem still remaining with OC 0.7.0 is that the graphical interface to choose the boot drive is gone and I'm left only with the text menu at the top right.

The same plist was giving the graphical interface in 0.6.8 and I cannot find anycahnge regarding that in the 0.7.0 description.
Where hold I look?
Thanks

 

[pastrychef]

I got it to work with-lilubetaall.

The only problem still remaining with OC 0.7.0 is that the graphical interface to choose the boot drive is gone and I'm left only with the text menu at the top right.

The same plist was giving the graphical interface in 0.6.8 and I cannot find anycahnge regarding that in the 0.7.0 description.
Where hold I look?
Thanks

I've had "-lilubetaall" along with the enablers for WhateverGreen and AppleALC for compatibility with macOS versions outside of the whitelist for a long time. There's no reason that I can see to omit them.

Check config.plist > Misc > Boot. Make sure Picker Mode is External and Show Picker is enabled. Also, make sure your "Resources" are compatible with the version of OpenCore you are using.

 

[CurtisMayfly]

@pastrychef, thank you so much for all the work you do in this community. I'm an aspiring composer and without my Hackintosh, I couldn't afford to pursue my craft at the level I would like to. So I'm eternally grateful for your willingness to share your expertise.

I've been using your build for a few years and it has been absolutely flawless. However, I've recently come into possession of a few extra monitors and have made the unfortunate discovery that only one of the three displayports on my Vega 56 seems to be working. All three monitors work on the Windows side of my system, so I've ruled out hardware. I've attached my EFI folder for reference. Prior to the multi monitor setup, I wasn't running Lilu or Whatevergreen. That has since been corrected. I also enabled Launch CSM. I did run across another thread somewhere in which you recommended someone with a similar issue to use Intel FB Patcher to inject ig-platform-id like this:

But I looked at both of the guides you attached in the post and am struggling to sort it out. Can you rescue me from my ignorance and help me get these monitors up and running?

*I know you aren't a multi monitor guy, so I apologize for dragging you into that world. But, well... you know what they say -

"Help me, Obi-Wan Kenobi. You're my only hope."

 

[pastrychef]

@pastrychef, thank you so much for all the work you do in this community. I'm an aspiring composer and without my Hackintosh, I couldn't afford to pursue my craft at the level I would like to. So I'm eternally grateful for your willingness to share your expertise.

I've been using your build for a few years and it has been absolutely flawless. However, I've recently come into possession of a few extra monitors and have made the unfortunate discovery that only one of the three displayports on my Vega 56 seems to be working. All three monitors work on the Windows side of my system, so I've ruled out hardware. I've attached my EFI folder for reference. Prior to the multi monitor setup, I wasn't running Lilu or Whatevergreen. That has since been corrected. I also enabled Launch CSM. I did run across another thread somewhere in which you recommended someone with a similar issue to use Intel FB Patcher to inject ig-platform-id like this:

View attachment 522163

But I looked at both of the guides you attached in the post and am struggling to sort it out. Can you rescue me from my ignorance and help me get these monitors up and running?

*I know you aren't a multi monitor guy, so I apologize for dragging you into that world. But, well... you know what they say -

"Help me, Obi-Wan Kenobi. You're my only hope."

What version of Clover are you running? It seems really old.

What version of macOS are you using?

Yes, you need WhateverGreen to enable all the video out ports.

No, you don't need all that stuff to enable IGPU.

Please try the attached EFI.

 

[CurtisMayfly]

What version of Clover are you running? It seems really old.

What version of macOS are you using?

Yes, you need WhateverGreen to enable all the video out ports.

No, you don't need all that stuff to enable IGPU.

Please try the attached EFI.

Thanks a ton! All monitors are working perfectly with the EFI you provided. I'm on Clover 5.18.3.0. and MacOS 10.15.7.