I have attached a zip archive with efi GA-Z370-P-D3. sleep ok, wake up ok but no video.

[Neamtu]

GA-Z370P-D3 after going to sleep, when I wake him up starts but not video, he will have to restart forcibly.
I created an EFI with OC Gen-X, it works well the problem is that if I leave it to sleep the wake-up is ok but it doesn't start video INTEL UDH630 Built-in I5 8400 Processor. Does anyone have any idea how I could correct the video to wake up from sleep with the computer?
I have attached a zip archive with efi GA-Z370-P-D3.

 

[miliuco]

@Neamtu
Have you hda-gfx property in config.plist?
If you have KP or black screen when you leave sleep, you have to replace hda-gfx property with No-hda-gfx, this usually fixes those failures when leaving sleep but audio is lost through HDMI. Replace these 2 lines:

                <key>hda-gfx</key>
                <string>onboard-1</string>

for these other 2:

               <key>No-hda-gfx</key>
               <data>AAAAAAAAAAA=</data>

 

[Neamtu]

@Neamtu
Have you hda-gfx property in config.plist?
If you have KP or black screen when you leave sleep, you have to replace hda-gfx property with No-hda-gfx, this usually fixes those failures when leaving sleep but audio is lost through HDMI. Replace these 2 lines:

                <key>hda-gfx</key>
                <string>onboard-1</string>

for these other 2:

               <key>No-hda-gfx</key>
               <data>AAAAAAAAAAA=</data>

Thanks for the suggestion, I'm not a programmer, but I tried to look in config plist the two command lines you suggested to me and they don't exist. I mention that I created it with OC Gen-X

 

[miliuco]

Thanks for the suggestion, I'm not a programmer, but I tried to look in config plist the two command lines you suggested to me and they don't exist. I mention that I created it with OC Gen-X

Could you upload here your config.plist file?

 

[Neamtu]

It's ok ?

 

[Neamtu]

Big Sur apart from the problem with video awakening works perfectly. I also received an 11.1 update from Apple without Errors.

 

[miliuco]

I’ll see it tomorrow and comment.

 

[Neamtu]

Thank you!

 

[miliuco]

Thank you!

I did not remember that in post 1 was your complete EFI.

IGPU related questions

• Do you only have the integrated UHD 630 Kaby Lake graphics card? With no other card added to the motherboard?
• Do you have basic graphics acceleration on macOS? To know:
  - the mouse pointer has a shadow
  - the Dock is semi-transparent
  - LaunchPad starts smoothly, without jerks, and closes the same
  - screensavers all work fine
  - on the screen, when you open a web page or a document, pressing Ctrl + Up or Ctrl + Down the content scrolls smoothly to the end, without jerks
  - the windows move smoothly, with the contents in view, without jerks.
• In Hackintool main window, it shows VDA Decoder Fully supported?
• iGPU and display how are they plugged, HDMI to HDMI?

Question not related to iGPU but which can influence the sleep function

You have USBInjectAll.kext that tries to load all the USB ports on the motherboard but macOS has by design a limit of 15 USB ports, USBInjectAll is used to create the map of the USB ports on the motherboard but it is a temporary solution that should be avoided because it can generate instability. Have yo looked for USBMap or USBPorts kext for the Gigabyte GA-Z370-P-D3 board?

 

[Neamtu]

1.Yes Intel UHD 630 coffe lake
2.No other card added
3.Acceleration onboard
4.The mouse pointer not has a shadow
5.Yes the Dock is semi-transparent
6.Yes LaunchPad starts smoothly, without jerks, and closes the same
7.Yez all screensavers all work fine.- on the screen, when you open a web page or a document, pressing Ctrl + Up or Ctrl + Down the content scrolls smoothly to the end,
function All Best
8.VDA Decoder failed in picture screenshot.
9.Cable dad hdmi-to dad dvi Eizo Monitor S2433W 1,07bilion color 30bit
10.Not Have yo looked for USBMap or USBPorts kext for the Gigabyte GA-Z370-P-D3 board
11.I'm trying to find a kext usb map or usb port for my motherboard that you told me I think low hopes but I try
Thanks a lot for the suggestions.