Contribute
Register

[Success] - Asus ROG Strix Z490-E Gaming + i9 10900K + OpenCore

Hopefully, Xiaoviejang, if you read this post, please make an updated EFI of your previous upload to the new Open Core, hopefully working with Big Sur. I have good faith in it to work :thumbup:

He HAS a version of 0.6.3, I even linked it in the first post of this thread.
 
I'm using AirportItlwm kext too anyway .. could you please share us you loaded kext currently man?

I've just trying big sur.. and the bluetooth is not working. Wifi working when booting but when toggle on/off its gone
I've got airportitlwm running but the option for wifi under Network does not appear. I'm not sure what is wrong. Bluetooth works, just not wifi. Does Airportitlwm also handle bluetooth? Because I also have the bluetooth firmware kext as well.
 
Last edited by a moderator:
I've got airportitlwm running but the option for wifi under Network does not appear. I'm not sure what is wrong. Bluetooth works, just not wifi.
Please use heliport
Does Airportitlwm also handle bluetooth? Because I also have the bluetooth firmware kext as well.
No, I recommend using intelFirmwarekext even if Bluetooth support by default.
 
Please use heliport

No, I recommend using intelFirmwarekext even if Bluetooth support by default.
I can't get itlwm to load, even when I set it to. Heliport always said itlwm wasn't running. So I switched to airportitlwm
 
I can't get itlwm to load, even when I set it to. Heliport always said itlwm wasn't running. So I switched to airportitlwm
both of them wrap intel wifi 6, so they must give the same result. AirportItlwm has another implement for handoff...etc, thing you need to check: does your motherboard disable the wifi to save power or issue related to cool boot via hackintool.
Take the picture related to the peripheral part in hackintool and post it here. So we can check.
 
both of them wrap intel wifi 6, so they must give same result. AirportItlwm has another implement for handoff...etc, thing you need to check is did your motherboard disable the wifi to save power or issue related to cool boot via hackintool.
Take the picture related to peripheral part in hackintool and post here. So we can check.
My bluetooth works, it's just the wifi that doesn't. I didn't use Hackintool for any of my configuration, but I did download it to look at the status of my devices.
 

Attachments

  • Screen Shot 2020-11-17 at 7.48.26 AM.png
    Screen Shot 2020-11-17 at 7.48.26 AM.png
    118.8 KB · Views: 54
  • Screen Shot 2020-11-17 at 8.04.18 AM.png
    Screen Shot 2020-11-17 at 8.04.18 AM.png
    25.3 KB · Views: 46
your wifi device missing. please look at the first table. it shows the ethernet and the wifi device should be there if itlwm/airportitlwm loaded in the Extensions tab of hackintool.

Please check the Extensions tab if itlwm/airportitlwm loaded in there. You have another method to check using terminal but using hackintool is faster and familiar.
 
your wifi device missing. please look at the first table. it shows the ethernet and the wifi device should be there if itlwm/airportitlwm loaded in the Extensions tab of hackintool.

He's right, should look something like this except with the built-in WiFi instead of Broadcom:

1605630450130.png
 
your wifi device missing. please look at the first table. it shows the ethernet and the wifi device should be there if itlwm/airportitlwm loaded in the Extensions tab of hackintool.

Please check the Extensions tab if itlwm/airportitlwm loaded in there. You have another method to check using terminal but using hackintool is faster and familiar.
It shows itlwm is loaded
 

Attachments

  • Screen Shot 2020-11-17 at 8.33.46 AM.png
    Screen Shot 2020-11-17 at 8.33.46 AM.png
    22.1 KB · Views: 42
hmm, something wrong here. let me think

Hey. you use the old version of itlwm, please upgrade to the latest version(1.1.0). wifi 6 (AX201 with device id 0x06F0) didn't support in gen 1 (version 1.0)
 
Back
Top