- Joined
- Nov 9, 2020
- Messages
- 29
- Motherboard
- ASUS N56V
- CPU
- i7-3610QM
- Graphics
- HD 4000 & GT 630M
- Mobile Phone
what is the make and model of your hard drive/nvme?I tried changing the SecureBootModel, but that did not help. I also removed the -wegnoegpu argument, but it didn't solve it either. I reverted those changes and am stuck here. Files attached too.
View attachment 495005
It is a WDC WD5000BPVX-00JC3T0what is the make and model of your hard drive/nvme?
should be okIt is a WDC WD5000BPVX-00JC3T0
I tried without CtlnaAHCIPort.kext first and it failed almost immediately and said it was missing. I then swapped them and it is stuck at the same spot as the previous screenshot. The files are the same as before, just with XHCI-unsupported.kext removed.should be ok
also noticed you have both:
CtlnaAHCIPort.kext
XHCI-unsupported.kext
only one should be used
try XHCI-unsupported.kext first on it's own and then try XHCI-unsupported.kext on it's own
also test both 1 at a time again but this time disable nvmefix.kextI tried without CtlnaAHCIPort.kext first and it failed almost immediately and said it was missing. I then swapped them and it is stuck at the same spot as the previous screenshot. The files are the same as before, just with XHCI-unsupported.kext removed.
Is there a way to disable it other than removing from the kext folder? I receive the following when I removed it from the folder. This is the same error I received when I removed CtlnaAHCIPort.kext, just referencing that kext instead.also test both 1 at a time again but this time disable nvmefix.kext
yes, in your config.plist, just disable the kext that way:Is there a way to disable it other than removing from the kext folder? I receive the following when I removed it from the folder. This is the same error I received when I removed CtlnaAHCIPort.kext, just referencing that kext instead.View attachment 495011
<dict>
<key>Arch</key>
<string>Any</string>
<key>BundlePath</key>
<string>NVMeFix.kext</string>
<key>Comment</key>
<string></string>
<key>Enabled</key>
<true/>
<key>ExecutablePath</key>
<string>Contents/MacOS/NVMeFix</string>
<key>MaxKernel</key>
<string></string>
<key>MinKernel</key>
<string></string>
<key>PlistPath</key>
<string>Contents/Info.plist</string>
</dict>
<dict>
<key>Arch</key>
<string>Any</string>
<key>BundlePath</key>
<string>NVMeFix.kext</string>
<key>Comment</key>
<string></string>
<key>Enabled</key>
<false/>
<key>ExecutablePath</key>
<string>Contents/MacOS/NVMeFix</string>
<key>MaxKernel</key>
<string></string>
<key>MinKernel</key>
<string></string>
<key>PlistPath</key>
<string>Contents/Info.plist</string>
</dict>
Disabled nvmefix.kext and kept CtlnaAHCIPort.kext, same result. Then disabled nvmefix.kext and kept XHCI-unsupported.kext, same result.yes, in your config.plist, just disable the kext that way:
from:
Code:<dict> <key>Arch</key> <string>Any</string> <key>BundlePath</key> <string>NVMeFix.kext</string> <key>Comment</key> <string></string> <key>Enabled</key> <true/> <key>ExecutablePath</key> <string>Contents/MacOS/NVMeFix</string> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string></string> <key>PlistPath</key> <string>Contents/Info.plist</string> </dict>
to:
Code:<dict> <key>Arch</key> <string>Any</string> <key>BundlePath</key> <string>NVMeFix.kext</string> <key>Comment</key> <string></string> <key>Enabled</key> <false/> <key>ExecutablePath</key> <string>Contents/MacOS/NVMeFix</string> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string></string> <key>PlistPath</key> <string>Contents/Info.plist</string> </dict>
Is there a log file generated that I can provide with more info? I have attached the one on the root of the thumb drive if that helps.yes, in your config.plist, just disable the kext that way:
from:
Code:<dict> <key>Arch</key> <string>Any</string> <key>BundlePath</key> <string>NVMeFix.kext</string> <key>Comment</key> <string></string> <key>Enabled</key> <true/> <key>ExecutablePath</key> <string>Contents/MacOS/NVMeFix</string> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string></string> <key>PlistPath</key> <string>Contents/Info.plist</string> </dict>
to:
Code:<dict> <key>Arch</key> <string>Any</string> <key>BundlePath</key> <string>NVMeFix.kext</string> <key>Comment</key> <string></string> <key>Enabled</key> <false/> <key>ExecutablePath</key> <string>Contents/MacOS/NVMeFix</string> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string></string> <key>PlistPath</key> <string>Contents/Info.plist</string> </dict>