Contribute
Register

HP Z600 10.14.6 install guide (PS2 keyboard and mouse not required)

Status
Not open for further replies.
Well you gave me hope too, Im about to try this this weekend, dualbooting with win 10. Wish me luck. Im glad your issue worked out.
 
Got a Nvidia GTX1650 GPU in my Z600, no hope to try Mojave now. need to get a AMD GPU card
 
Hello Guys I need help.

I have HP Workstation Z600 48GB Ram X5650 12 Core 24 Threads Bios V3.61
I did everything to the T with the SATA However I do not have the USB 3.0 Card I went and pulled out my Old PS/2 Keyboard. Problem I am having, I can not choose Language I am stuck on this screen. I also went as far as trying my Real Mac Keyboard and Mouse that goes with my Mac Pro. That still do not work.

Can Someone lead me in the right direction in getting this to work with PS/2 Keyboard and Mouse. Thanks.
 
Can Someone lead me in the right direction in getting this to work with PS/2 Keyboard and Mouse.
If you want to use a device that lacks native support then you must install a driver that adds that support.
In your case something like VoodooPS2Controller.kext.
 
If you want to use a device that lacks native support then you must install the driver that adds that support.
In your case something like VoodooPS2Controller.kext.
Thanks for you Reply, Can you Tell me how I can add support and where can I get VoodooPS2Controller.kext?
Do I have to redo the SATA install Drive to add the kext
 
Thanks for you Reply, Can you Tell me how I can add support and where can I get VoodooPS2Controller.kext?
Do I have to redo the SATA install Drive to add the kext
 
Thanks for the link and reply. I'm still new to this have not done this in a while. Can you tell me how and where I drop the Kext File Thanks alot for your Reply
 
Thanks for the link and reply. I'm still new to this have not done this in a while. Can you tell me how and where I drop the Kext File Thanks alot for your Reply
clover/kexts/other folder with your other kexts
 
clover/kexts/other folder with your other kexts
Was able to get it to the next screen where it say MacOS Utilities but it will not go anything further. I can move to choose Install MacOS when choosing to select Continue it will not go anything further just sit there. Is it something I did wrong?
 
clover/kexts/other folder with your other kexts
Thank You so much for your help. I Got it working with the PS/2 Support Thank You so Much. Have not done Hackintosh in a long time.

I was able to get it working and to the point where I was able to do the Part where he said
launch MultiBeast, here is the configuration you should use:

Quickstart - Legacy Boot Mode.
Drivers- select nothing.
bootloaders - select nothing.
Customize - system definition - MacPro - MacPro5,1

I did this and when it boots it said and get stuck on Attempting to Boot. Can you tell me if I was suppose to leave Legacy Boot check in Bootloaders?

Also I was able to drag all the Kexts to the desktop and launch Kexts Beast.

Second problem I am having which I know its my GPU, I have Radeon R7 370 and this Guide Has RX 580. Can you tell me how to get my GPU Working? When I boot it is Stuck at Booting up Black Screen Progress bar gets to the end and stops. I had this happen to my Mac Pro 3,1 updating to Catalina and I had ATI card in I took it out and Put my Firepro W7000 and it fired right up. With the Hackintosh it is doing the same please help.
 
Status
Not open for further replies.
Back
Top