[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[CaseySJ]

@CaseySJ Hello again!
I've purchased RX580 Pulse, re-created install USB using the instruction from the post#1, but faced panic during running the installer - it's in the screenshot attached. What do I need to change in the config or EFI folder to make it work?

Thank you in advance!

Please check these BIOS settings:

• Initial Display Output --> PCIe 1 Slot
• Internal Graphics --> Enabled (not Auto)
• BIOS version F9g

Then use the attached config.plist and insert the USB install disk in a Blue, Red or Yellow USB 3.x port on the Designare Z390.

 

[vitilius]

Please check these BIOS settings:

• Initial Display Output --> PCIe 1 Slot
• Internal Graphics --> Enabled (not Auto)
• BIOS version F9g

Then use the attached config.plist and insert the USB install disk in a Blue, Red or Yellow USB 3.x port on the Designare Z390.

Followed all your instructions, but the panic still occurs, nothing changed

Any other recommendations?

 

[jjsenecal]

Did you see the red NOTE at the very top of the guide you quoted?

@CaseySJ Yeah, ok, so I'm an idiot and skipped over that part. Sorry for the unnecessary post.

 

[CaseySJ]

Followed all your instructions, but the panic still occurs, nothing changed

Any other recommendations?

This is very puzzling. Please list the make/model of all key components including memory, NVMe SSD, WiFi/BT card, any other PCIe cards.

 

[vitilius]

This is very puzzling. Please list the make/model of all key components including memory, NVMe SSD, WiFi/BT card, any other PCIe cards.

Here's all I have:

1. CPU - i9-9900k
2. MB - Z390 Designare
3. GPU - SAPPHIRE RX580 8Gb PULSE [11265-05-20G]
4. Cooler - Dark Rock Pro 4
5. RAM - G.Skill AEGIS CL16 x2
6. Power Supply - be quiet! PURE POWER 11 700W
7. HD - SSD Toshiba SATA III 4TB
8. NVME - WD Black sn750 500gb m.2 2280
9. Wifi/Bluetooth - FV-HB1200

 

[CaseySJ]

@Lkevin30,

Please note that every mini-guide in this thread contains the line:

• Please do not quote this guide in its entirety. Post a link instead.

BIOS configuration is in Post #1 where it has always been.

 

[CaseySJ]

Here's all I have:

1. CPU - i9-9900k
2. MB - Z390 Designare
3. GPU - SAPPHIRE RX580 8Gb PULSE [11265-05-20G]
4. Cooler - Dark Rock Pro 4
5. RAM - G.Skill AEGIS CL16 x2
6. Power Supply - be quiet! PURE POWER 11 700W
7. HD - SSD Toshiba SATA III 4TB
8. NVME - WD Black sn750 500gb m.2 2280
9. Wifi/Bluetooth - FV-HB1200

Another user recently experienced problems with WD Black SN750. Do you have another disk (SATA SSD or NVMe SSD) that you can use temporarily just to check if the problem goes away with a different disk?

 

[vitilius]

Another user recently experienced problems with WD Black SN750. Do you have another disk (SATA SSD or NVMe SSD) that you can use temporarily just to check if the problem goes away with a different disk?

Unfortunately I don't have any other ssd or nvme. Is it possible to use external HD's to check this issue?

 

[CaseySJ]

Unfortunately I don't have any other ssd or nvme. Is it possible to use external HD's to check this issue?

Yes, certainly. Can you install external HDD/SDD into a USB 3 enclosure and connect via USB 3?

 

[vitilius]

I meant I have external drives like Lacie 4tb or WD my passport ultra. Should I try them via USB 3?