Contribute
Register

AsRock X299 Creator

Status
Not open for further replies.
This may be of interest for those watching this thread. Specifically the tip about how to use the MSI X299 Pro and a hardware hack to get an x16/x8/x16/x4/x4 PCI-e slot configuration. :) The same thing works for an ASRock Creator or Taichi CLX (bifurcation settings are in a menu called "IIO Configuration").

 
This may be of interest for those watching this thread. Specifically the tip about how to use the MSI X299 Pro and a hardware hack to get an x16/x8/x16/x4/x4 PCI-e slot configuration. :) The same thing works for an ASRock Creator or Taichi CLX (bifurcation settings are in a menu called "IIO Configuration").

I'll read that
Thanks
 
Hello
I realize that I lost my 10G ethernet port.
It doesn't show in hackintool ➧ System ➧ peripherals
capture 2020-10-07 à 08.35.09.png
or System infos ➧ network interface
capture 2020-10-07 à 08.35.59.png

It does show in hackintool ➧ PCIe
capture 2020-10-07 à 08.38.19.png

I've added the kernel patch:
capture 2020-10-07 à 08.42.07.png
Any ideas ?
thanks in advance
 
Last edited:
Hello
I realize that I lost my 10G ethernet port.
It doesn't show in hackintool ➧ System ➧ peripherals
View attachment 490851
or System infos ➧ network interface
View attachment 490850

It does show in hackintool ➧ PCIe
View attachment 490849

I've added the kernel patch:
View attachment 490852
Any ideas ?
thanks in advance
It's Back
- Disable itwnx.kext
- Trash /Library/Preferences/ "System configuration" folder
- Reboot
- Enable itwnx.kext
- Reboot
capture 2020-10-07 à 12.29.20.png
 
Last edited:
Hello
I realize that I lost my 10G ethernet port.
It doesn't show in hackintool ➧ System ➧ peripherals
View attachment 490851
or System infos ➧ network interface
View attachment 490850

It does show in hackintool ➧ PCIe
View attachment 490849

I've added the kernel patch:
View attachment 490852
Any ideas ?
thanks in advance
Hello Every one
I need Help
I have another Asrock X299 Creator with the same issue : MacOS doesn't load the Aquantia kext.
MacOS :10.15.7

What I'have tried without success :
- Trash /Library/Preferences/ "System configuration" folder
- Reset NVRAM
- Rebuild the Kext Cache (Via hackintool)

Another thing : is that the Intel WIFI (AX200 with itwnx.kext) doesn't show up either.

It's like MacOs is restricted to only one ethernet connection.!!

Any ideas ?
Thanks in advance
 
Hello Every one
I need Help
I have another Asrock X299 Creator with the same issue : MacOS doesn't load the Aquantia kext.
MacOS :10.15.7

What I'have tried without success :
- Trash /Library/Preferences/ "System configuration" folder
- Reset NVRAM
- Rebuild the Kext Cache (Via hackintool)

Another thing : is that the Intel WIFI (AX200 with itwnx.kext) doesn't show up either.

It's like MacOs is restricted to only one ethernet connection.!!

Any ideas ?
Thanks in advance
Hi @oli.mathieu just disable secure boot in .plist, its sitting on "Default" I think, change to "Disabled". Reboot, reset NVRam, that should do it.

Are you on 0.6.3??
 
Hi @oli.mathieu just disable secure boot in .plist, its sitting on "Default" I think, change to "Disabled". Reboot, reset NVRam, that should do it.

Are you on 0.6.3??
Okay I'l try that soon
I'm still with OC 0.6.2
I keep you posted
 
I'm trying to install Big Sur without success. And I play with my UEFI settings
Just a Reminder for Owners of this mobo
IMG_6215.jpg

OC Tweaker/CPU configuration/Multicore Enhancement ➧ Disabled
OC Tweaker/CPU configuration/Intel Speed Shift Technology ➧ Native ode with No Legacy Support
Are Mandatory for i9 10900X and Catalina
 
Hi @oli.mathieu just disable secure boot in .plist, its sitting on "Default" I think, change to "Disabled". Reboot, reset NVRam, that should do it.

Are you on 0.6.3??
You were/are right
Now it's working !!
Big Thanks
FYI I'm using OC 0.6.2
 
Thanks, i upgraded from x299 deluxeii to creator board because i did not want the 3rd nvme sticking out and 5Gb lan never worked. At first it did not boot at all!. then i used supplied efi folder in this thread. everything booted successful. then i copied my old serial number smuuid reboot again. and every plugin is activated.
 
Status
Not open for further replies.
Back
Top