Contribute
Register

[SUCCESS] GB Z490M / 10.5.7 / i7 10700K / 5700XT / OpenCore

Status
Not open for further replies.
In my build, in the process of building the USBMap, all the ports showed up just by using the portlimit-removal patch in opencore - no USBInjectAll needed. If they don't show up I guess you need to run the inject kext, but idk really

Hey ! If some people interested, I have receive today a new cable to test if my Fenvi T919 was working : USB Cable
It's a temporary solution but now full working OOTB. Just plug on a USB port back and no more on the FPANEL USB of MB.

Now just need to find how to activate or recognized the x2 Front Panel USB ports on MB.

Where did you find the port limit removal patch for opencore ? Thx
 
Hey ! If some people interested, I have receive today a new cable to test if my Fenvi T919 was working : USB Cable
It's a temporary solution but now full working OOTB. Just plug on a USB port back and no more on the FPANEL USB of MB.

Now just need to find how to activate or recognized the x2 Front Panel USB ports on MB.

Where did you find the port limit removal patch for opencore ? Thx

In config.plist the kernel settings there's a quirk that is called XhciPortLimit you can enable
 
In config.plist the kernel settings there's a quirk that is called XhciPortLimit you can enable

Damn ... it's working =) (You're the Boss Thx) Ok now the BT of my Fenvi T919 is working. But the problem is that front usb ports still doesn't appear in Hackintool !!! So any idea on how to include it in USBmap.kext ?
 
Damn ... it's working =) (You're the Boss Thx) Ok now the BT of my Fenvi T919 is working. But the problem is that front usb ports still doesn't appear in Hackintool !!! So any idea on how to include it in USBmap.kext ?

Sweet. Are you using my USBMap or do you want to generate your own? The dortania guide to create USBMap is really good. It uses a commandline tool instead of Hackintool. But you can't have an USBMap kext active for this, obviously. Sorry I can't be of more help!
 
Sweet. Are you using my USBMap or do you want to generate your own? The dortania guide to create USBMap is really good. It uses a commandline tool instead of Hackintool. But you can't have an USBMap kext active for this, obviously. Sorry I can't be of more help!
Thanks for you're responses and posting this - I had a similar build and was able to boot easily, almost everything working with your post. I will be working at getting the front USB ports and HDMI audio running after the long weekend, so will post what I end up with, i'll modify your USBMap or just use it to compare - may work for @adrieno. But as far as I can tell, everything else is working perfectly.
 
Thanks for you're responses and posting this - I had a similar build and was able to boot easily, almost everything working with your post. I will be working at getting the front USB ports and HDMI audio running after the long weekend, so will post what I end up with, i'll modify your USBMap or just use it to compare - may work for @adrieno. But as far as I can tell, everything else is working perfectly.
Hey ! Sounds good :) If you can find the solution for front USB I'm ok. ^^ For me everything is working, just only to find these front USB port on MB ! Will try tomorrow.
 
Thanks for you're responses and posting this - I had a similar build and was able to boot easily, almost everything working with your post. I will be working at getting the front USB ports and HDMI audio running after the long weekend, so will post what I end up with, i'll modify your USBMap or just use it to compare - may work for @adrieno. But as far as I can tell, everything else is working perfectly.

Today I've tried to manage the USB ports limites... but maybe I miss something. Have an error when using USBMap tool and select "D" for discover :

Was unable to locate any valid ports.
Please ensure you have XHC/EH01/EH02 in your IOReg

Normally don't need to rename XHC ports (because using SMBIOS 19,1) ! Don't understand :/
 
Today I've tried to manage the USB ports limites... but maybe I miss something. Have an error when using USBMap tool and select "D" for discover :

Was unable to locate any valid ports.
Please ensure you have XHC/EH01/EH02 in your IOReg

Normally don't need to rename XHC ports (because using SMBIOS 19,1) ! Don't understand :/
So, I have hdmi audio and usb front ports working fine on my build. I'm using the same MB as the OP, I didn't end up having to change anything - upon restart everything worked. I agree, the opencore guide says you shouldn't need to rename using newer SMBIOS. Sorry I can't be of more help, but wanted you to know that nazrm's seems to be working for me.
 
So, I have hdmi audio and usb front ports working fine on my build. I'm using the same MB as the OP, I didn't end up having to change anything - upon restart everything worked. I agree, the opencore guide says you shouldn't need to rename using newer SMBIOS. Sorry I can't be of more help, but wanted you to know that nazrm's seems to be working for me.

Hello ;) Thanks for your answer, maybe I was not clear. I'm sorry, when I speak about Front Panel connector it's not exactly that. The USB 3 Front Panel on my case with 2xUSB/Audio work perfectly. But I have 2 others USB 1.0/2.0 with 9 pins. And I need to activate them to connect my Fenvi T919 (For WiFi & BT).

When I use the XhciPortLimit quirk the 2 x ports are working. But any idea how to include them in my SSDT/USBMap file !!! :/

Capture d’écran 2020-09-08 à 11.59.45.jpg
 
Hello ;) Thanks for your answer, maybe I was not clear. I'm sorry, when I speak about Front Panel connector it's not exactly that. The USB 3 Front Panel on my case with 2xUSB/Audio work perfectly. But I have 2 others USB 1.0/2.0 with 9 pins. And I need to activate them to connect my Fenvi T919 (For WiFi & BT).

When I use the XhciPortLimit quirk the 2 x ports are working. But any idea how to include them in my SSDT/USBMap file !!! :/

I understand now - you actually need to generate a new USBMap file to make it work because my map doesn't have support for the second USB extension port. The USBmap tool makes it quite easy, but you gotta do it from scratch basically. Check this (and make sure to read prerequisites - very important!): https://dortania.github.io/OpenCore-Post-Install/usb/intel-mapping/intel.html
 
Last edited:
Status
Not open for further replies.
Back
Top