- Joined
- Jul 14, 2019
- Messages
- 109
- Motherboard
- ASUS WS SAGE/10G
- CPU
- i9-10940X
- Graphics
- Radeon VII
- Mac
- Mobile Phone
Considered that I use Sabrent Rocket SSD as a boot disk and Radeon VII, the question is: are these two Kext necessary?
Considered that I use Sabrent Rocket SSD as a boot disk and Radeon VII, the question is: are these two Kext necessary?
AGPM injector was dedicated to iMacPro 1,1 SMBIOSConsidered that I use Sabrent Rocket SSD as a boot disk and Radeon VII, the question is: are these two Kext necessary?
ssdt for a tb2 & tb3 are disabled:
View attachment 486659View attachment 486660
the full ioreg is attached
I find an error on the original SSDT-RTC0 :
As you can see on the left on the picture below on the original SSDT-RTC0 :
The value 0x04 should wrong as @Ellybz pointed on a post above :
The right value should be 0x02 as you can the on the right on the picture from DSDT
So i edited the SSDT-RTC0
View attachment 486698
[sorry for the bad quality of picture but my cat broke my screen ]
Thanks you are pointing the explanation for Asus motherboard :Your SSDT is still missing 72 and 73 if you change it to 0x02. Also it's not using a new RTC0 device so I don't think it'll do anything?
Look at dracoflars comments in the RTC0.aml
acidanthera/OpenCorePkg
OpenCore bootloader. Contribute to acidanthera/OpenCorePkg development by creating an account on GitHub.github.com
I'd double check with an ASUS DSDT to see if it shows the same. I don't have my hack anymore to compare
ioreg attachedDisable SSDT for tb1 and enable for tb2.