Intel NUC 10 Frost Canyon

[Majesticmatt]

This is my EFI for the i5, seems stable - bluetooth and wifi work (you need to input your SSID and password into the info.plist in the ltwmx.kext package) the sound is fine on first boot but is temperamental after sleep. Also shut down reboots rather than shuts down. Hope it helps !

 

[PowerfreakOZ]

A

This is my EFI for the i5, seems stable - bluetooth and wifi work (you need to input your SSID and password into the info.plist in the ltwmx.kext package) the sound is fine on first boot but is temperamental after sleep. Also shut down reboots rather than shuts down. Hope it helps !

Awesone, will pick it apart tomorrow and checkout the config.plist.
You could use Heliport instead of plist for Wi-Fi settings (although I am using LAN).

 

[PowerfreakOZ]

A

Awesone, will pick it apart tomorrow and checkout the config.plist.
You could use Heliport instead of plist for Wi-Fi settings (although I am using LAN).

I inserted NVMeFix.kext, ran snapshot, rebooted. Then tried a shutdown, and it worked. Try that.

 

[p4tpr0]

Try this version and report back please. Make sure to update serial numbers etc using GENSYMBIOS

Hi Leesureone, I'm curious, have you upgraded your NUC10i7 to the latest 10.15.6?
I'm currently running 19G73 with the EFI you provided (OC 0.5.x iirc) and I'm trying to recreate everything with Lilu and Friends for the latest OC version before installing the Apple update but it fails to compile some kext…

 

[el_loco93]

I am a super noob but how in the world did you guys get this up and running I keep trying and failing. I am using the regular clover guide on the nuc 10 i7 with an NVME ssd and I keep getting the white circle with a line through. any help would be appreciated.

 

[p4tpr0]

I am a super noob but how in the world did you guys get this up and running I keep trying and failing. I am using the regular clover guide on the nuc 10 i7 with an NVME ssd and I keep getting the white circle with a line through. any help would be appreciated.

I'm a total hackintosh noob too, and may be I was lucky: I followed the guide to create the installer (Unibeast, Clover etc.), made the USB key, then I've searched the forum for an already made EFI (see Leesureone's thread about NUC https://www.tonymacx86.com/threads/...bxx-nuc8i7bxx-etc.261711/page-90#post-1968320 , or just few pages before your post in this thread), dropped this EFI on my USB key and installed.
Later I've cleaned my mess a bit (removed Clover from the EFI partition and kept only OC) but everything was pretty smooth : never had a hang/black screen/panic/etc.
As you can see from the post just before yours: now that I want to upgrade OSX, I'm in trouble

The Unibeast and Al. guides I've followed are those one:

UniBeast: Install macOS Catalina on Any Supported Intel-based PC

The following guide is a complete walkthrough for updating to or installing a fresh version of macOS Catalina. It requires no experience and all of the basic installation and post-installation tools are available on tonymacx86.com. Table of Contents Step 1: Download macOS Catalina Step 2...

www.tonymacx86.com

Video Guide to making a UniBeast USB Installer

Your Mac must have at least an Intel Core 2 Duo processor and be able to run older versions of Mac OS X and use Unibeast to create your installer. If you would like to buy, borrow or rent a used Mac mini to create your installer, the 2010 models are the best choice. They all have a Core 2 Duo...

www.tonymacx86.com

 

[Majesticmatt]

I inserted NVMeFix.kext, ran snapshot, rebooted. Then tried a shutdown, and it worked. Try that.

Hmm, no joy for me adding NVMEFix. Helliport is working fine, it's come on a lot since I last looked at it

 

[PowerfreakOZ]

In

Hmm, no joy for me adding NVMEFix. Helliport is working fine, it's come on a lot since I last looked at it

interesting indeed.
Well woke up this morning, browsed a few webpages and the pausing came back!!
Updating firmware now just in case. What are your bios settings? Not sure if I have missed something or left something enabled (or vice versa)...

 

[Leesureone]

Hi Leesureone, I'm curious, have you upgraded your NUC10i7 to the latest 10.15.6?
I'm currently running 19G73 with the EFI you provided (OC 0.5.x iirc) and I'm trying to recreate everything with Lilu and Friends for the latest OC version before installing the Apple update but it fails to compile some kext…

I have but haven‘t updated to OC 6.0 yet, other projects taking priority, but I will at some point

 

[p4tpr0]

I have but haven‘t updated to OC 6.0 yet, other projects taking priority, but I will at some point

Ok, so using the EFI you've provided should work with the latest 10.15.6 release? Good to know