Contribute
Register

[Success] - Asus ROG Strix Z490-E Gaming + i9 10900K + OpenCore

Hi! Il trying to build my new hack with no success.
I use catalina 10.15.6 and oc 0.59 following the suggestions in THIS thread. Mac type set to 19.1 or 20.1 with no chance. Bootstrap end with THIS screen
Can someone help me?
check in your BIOS for DVMT is set to 64MB or 128MB
 
check in your BIOS for DVMT is set to 64MB or 128MB
Rembering one of your past suggestion i tried both 64 & 128 Mb but i got the same result
 
I forgot... in using the integrated graphics. I didnt Connect ed the 5700 xt
 
The FULL fix for DRM (Apple TV+) only works with the RX 560 or similar cards with the boot argument I have in there. With iGPU lower levels work like Netflix, just not Apple TV+
Oh I see. I don’t have any relation with AppleTV+ anyway. Just thinking about netflix and amazon prime. So I guess I'm safe and okay with iGPU display output. Thanks.
 
I forgot... in using the integrated graphics. I didnt Connect ed the 5700 xt
You should try OC 0.6.0, why use of older one if you can get latest stable builds?
 
You should try OC 0.6.0, why use of older one if you can get latest stable builds?

i used 059because in previous posts seem that THIS version works so i used that
I get an error also with 060
 

Attachments

  • F1DF5A1C-13A1-4DB0-802B-177A71B0A363.jpeg
    F1DF5A1C-13A1-4DB0-802B-177A71B0A363.jpeg
    4.6 MB · Views: 51
i used 059because in previous posts seem that THIS version works so i used that
I get an error also with 060

Remember this thread and my EFI.zip are specific to the Strix Z490-E. Your profile says you have the Hero board, which may be different enough to cause problems. (USB port mapping for example)

I would take a look here as a starting point: https://dortania.github.io/OpenCore-Install-Guide/config.plist/comet-lake.html

Also on the left side there's a "Troubleshooting" section that covers most of the common boot errors. Finally, BIOS settings are VERY important, having even one set wrong could prevent it from booting.
 
Again: I have a black screen via HDMI if I put the display to sleep and I wake up. Via DP I have no problem. Is there a solution for that?
 
Hi everyone ;)
First of all, i would like to thank Scope666 for his work.
everything works like a charm after install.
My only problem is that my CPU ID is not correctly shown, i have a 10900K
I read somewhere here that we must choose IMac20,1
Is that correct ?
(I ask this question because i cant install "Native Access", it crashes everytime at start and i read on a forum
this error can provide from a bad "Cpu ID....)
 

Attachments

  • Capture d’écran 2020-08-25 à 13.41.12.png
    Capture d’écran 2020-08-25 à 13.41.12.png
    14.8 KB · Views: 57
Other problem, i cant generate SMBIOS ( On Scope's OC 0.6.0 EFI ) because OCConfigurator won't open my Config.plist
and GENSMBIOS says my config.plist is corrupted.
 
Back
Top