[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

dgsga · Jul 4, 2020

gandem said:
Here's a link to the versions I tried. One with good success, the other with none. NVM23 worked well for me but I didn't stay on it long in an effort to find a way to get dual monitor support over one TB connection. I landed on NVM50 and I don't feel a need to change unless a new option becomes available.

Edit: https://www.tonymacx86.com/threads/...olt-3-i7-9700k-amd-rx-580.267551/post-2126514

@gandem
Do you have to do a warm reboot with your patched NVM50 Gigabyte Titan Ridge AIC to get attached devices working fully? I have mine partially working with DSB1 working properly only after a warm reboot. The DSB2 XHC tree does not populate at all in Ioregistry Explorer. Sure I must be missing something...

Inqnuam · Jul 4, 2020

Inqnuam said:
Yes sir!
In the week-end ill deliver a version with all motherboards and PCIe cards.

Can you explain (with screenshots if possible) what is the method to calculate checksum after vendor and device name changing please?

Vendor and Device name changers are ready!
View attachment 479031

Checksum is ready!

Capture d’écran 2020-07-04 à 17.49.36.png

Next Step:
Assemble all together for One-click Thunderbolt DROM SSDT with UID and custom Vendor, Device Name!

skootaD · Jul 4, 2020

skootaD said:
Has anyone found a tool to utilize any internal RGB components? I have a used a Win10 Vm to control my fan and AIO RGB's. But I cannot find a way to control the Corsair Vengeance RAM RGB. It seems as if the RAM is not recognized in the iCUE software. Is there a Gigabyte software I can try?

Also, I know the Corsair AIO had issues with a USB connection not allowing the computer to sleep successfully. Is there a workaround for this or is it fixed with Catalina?

Has anybody found a fix for this? I would like to be able to plug in the usb for corsair AIO for RGB control.

CaseySJ · Jul 4, 2020

gandem said:
I have one of these coming on Tuesday. If I were to add it to my system with rev1 version and use it without the header, would the new DROM file have any affect? Or would it need to run a patched firmware as well? Would love to do some additional testing.

The new DROM should work just as well with GC-Titan Ridge v1.0.

CaseySJ · Jul 4, 2020

skootaD said:
Has anybody found a fix for this? I would like to be able to plug in the usb for corsair AIO for RGB control.

We cannot yet control memory module lighting, but liquidctl supports several Corsair devices on macOS.

GitHub page.
Instructions for Designare Z390 (Monitor and Control NZXT All-in-One Coolers).
Much more comprehensive instructions are in the Z490 Vision D build guide.

Screen Shot 2020-07-04 at 12.15.18 PM.png

gandem · Jul 4, 2020

dgsga said:
@gandem
Do you have to do a warm reboot with your patched NVM50 Gigabyte Titan Ridge AIC to get attached devices working fully? I have mine partially working with DSB1 working properly only after a warm reboot. The DSB2 XHC tree does not populate at all in Ioregistry Explorer. Sure I must be missing something...

No, my devices are recognized on cold boots, warm boots, restarts, all just work immediately.

Petros · Jul 4, 2020

@CaseySJ I finally received the SOIC8 clip for my Rpi and proceeded to flashing my ASUS TB3 EX. Unfortunately the windbond chip doesn't get recognised, I triple-checked my connections and it is all good there. Anything else I can try?

CaseySJ · Jul 4, 2020

Petros said:
@CaseySJ I finally received the SOIC8 clip for my Rpi and proceeded to flashing my ASUS TB3 EX. Unfortunately the windbond chip doesn't get recognised, I triple-checked my connections and it is all good there. Anything else I can try?

I have two of these Asus TB3 EX cards so I know first hand how difficult they can be to read and write. But with the resistor/capacitor circuit described in the post below, I had no trouble whatsoever.