Contribute
Register

Asus PRIME Z490-P Catalina 10.5.5

Status
Not open for further replies.
In my case I don't yet have a DP display or DP-HDMI cable so I still have no output from HDMI.
Also tried booting Mojave but it seems it'll require different patching.

Btw, I see the AAPL,pci locations are different than the ones by the OpenCore guide. are those correct? are they the same with/without a dGPU?

And the routing of the ports is also based on gfxutil results?

Thanks!


For the HDMI, try Catalina 10.15.4. (Mojave is too old)
DP-HDMI cable I don't know if it works.
AAPL,pci, it is the same for both IGPU-Headless and IGPU with connectors.


I have not understood this question:
And the routing of the ports is also based on gfxutil results?
 
@FormerUser-594785 @adamsmasher,

Good to see that BIOS 1001 allows multi-monitor support with iGPU. Is everything working now (at least "everything" that should work on a Hackintosh :))?
 
Last edited by a moderator:
Last edited by a moderator:
Hi FormerUser-594785,

I am trying to get the Asus Prime Z490-P (i9-10900) Hacked. I have been trying to get this board booting all day. lol Always the same error [EB|#LOG:EXITBS:START]. Then so pleased to see your post. Tried your EFI and same issue. So it must be a bios setting.

I have:

Above 4G: enabled
vt-d: disabled
CSM: disabled
Fast Boot: disabled
Serial Port: disabled
Secure boot: Windows 8/10
I'm I missing something?

Thanks
 
Tried your EFI and same issue. So it must be a bios setting.

Are you trying macOS Catalina 10.15.5? did you update to latest BIOS. look above to some of the screenshots.

Also, keep in mind that once you past that stage an dGPU (non-intel/UHD630) would be helpful. I've yet to see a Desktop 10th reported using only UHD630.
 
Hi FormerUser-594785,

I am trying to get the Asus Prime Z490-P (i9-10900) Hacked. I have been trying to get this board booting all day. lol Always the same error [EB|#LOG:EXITBS:START]. Then so pleased to see your post. Tried your EFI and same issue. So it must be a bios setting.

I have:

Above 4G: enabled
vt-d: disabled
CSM: disabled
Fast Boot: disabled
Serial Port: disabled
Secure boot: Windows 8/10
I'm I missing something?

Thanks

Just to be sure, you download EFI folder from post 19?
 
Just a quick update. latest commits to WhateverGreen fix patching of IGPU on 10.15.5 :) (still no release yet).
Tomorrow I'll post the plists and kext for UHD630. It seems to be working for me now with HDMI output.

One note for those who go the AMD 5xxx route - remember to add agdpmod=pikera.
 
Status
Not open for further replies.
Back
Top