RuleBreaker01
Banned
- Joined
- May 31, 2018
- Messages
- 1,274
does anyone know where i get the original firmware for the disigner 390 so i can use the interface under windows?
please help (=
please help (=
Are you using DESIGNARE-Z390-NVM33-Elias64Fr.bin? I forgot if you were using any thunderbolt docks with display out? Using both display outs on the Caldigit TS3 Plus did not work for me on flashed NVM23 and NVM50 or stock NVM43.
I use NVM33 on my Titan I have considered changing to the one Casey is using on his z490 rig just to test. As of this moment I have no video routing threw the TB however, recently my wife got a Laptop from work and with it came a cal digit mini dock.
CalDigit Thunderbolt 3 Mini Dock
The CalDigit Thunderbolt 3 Mini Dock is a bus-powered dock that lets you connect your Thunderbolt 3 equipped Mac to two HDMI-enabled TVs or displays. Buy online now at apple.com.www.apple.com
Before I set it up on her desk to took my liberty with it to test some TB3 stuff. If it is hot plugged it works, if it warm boots it works, from cold boot it does not work, if plugged mid boot it seems to work. I tested it in both ports on the Titan Ridge, and with dual 4k monitors though they are HDMI outs not DP. I also only tested the video, there is a good chance the USB devices would have worked from cold boot.
CAUTION: Remove RadeonBoost.kext when updating or upgrading macOS
I'm about 1 meter from the Fenvi antennas,
tried with the Gigabyte ones, its a little bit better, but the differences isn't so much.
I even can't go to the toilet with my AirPods because the sound lags.
my iPhone 6 have a better antenna on it
View attachment 476986View attachment 476987View attachment 476988
I updated with this (RX 580) and seemed to have had no adverse symptoms... very curious to see what the story is here.What would be the symptoms of having done so?
To: @bmoney @ralphonz @jleahy2 @kellymac12 @iamjoehan
cc: @boob @ssccrab
All of you have reported USB port instability issues that occur anywhere from once a week to couple of times a day.
- Do any of you already own a Thunderbolt 3 Dock with multiple USB ports?
- If so, have you tried moving your 'complex' USB devices to the Thunderbolt dock?
- Keyboard and mouse can most likely remain where they are. These are 'simple' USB devices.
for me instability issues, scrreens always flickering from black to os back ground, until I removed it, redid my caches, restarted, reinstalled and redid coaches again....it somehow also "broke" safari... every time I was moving a safari window on my second monitor, safari kept crashing...I updated with this (RX 580) and seemed to have had no adverse symptoms... very curious to see what the story is here.
Ouch! The drivers64UEFI folder must be deleted completely and immediately. Empty the trash after moving the whole folder into it. Because you're already on Clover 5xxx now, the screenshot below is just FYI.
View attachment 476952
In your case, however, some questions:
- Are you saying that with Clover v4920 you were able to boot the Linux installation(s) properly?
- But after the switch to Clover v5xxx the Grub boot loader appears, but Grub is unable to boot Linux?
It's a good thing that you were able to test both the original "Catalina 10.15.4 Fresh Install" package and the new "May 2020 Update". Now we know that the May 2020 update does not play nicely with Mojave.
If you intend to have both (a) Mojave and (b) Catalina on the same physical SSD, but on different APFS Volumes, then the EFI folder needs to be capable of booting either of the two macOS versions. Right now only the original "Catalina 10.15.4 Fresh Install" can do that.
Yes -- if we use the original "Catalina 10.15.4 Fresh Install" zip package.