Contribute
Register

MacMan's Build: ASUS TUF Z390-PRO GAMING - i9-9900K - Vega 64 - Updated for 10.14.6 and NVRAM Support

Status
Not open for further replies.
Screen Shot 2020-06-12 at 3.55.46 PM.png
 
the one I have by default of MultiBeast
dart=0 nv_disable this is the one that shows me in my boot args
 
it shows me the same as the picture
 
please my friend help
 
MkVIGTI

ct.png
I will stay there, I will not pass
 
I would try to add Whatevergreen.kext to EFI/KEXT/Other folder. And you shouldn't need nv_disable=1 anymore as boot argument in Clover when you don't use a NVIDIA card. Also you can add slide=0 as boot argument, that might help in some cases. Did you already try to boot to clover menu and press F11 to clear NVRAM? That might help too.
 
@MacMan
Is this Built Catalina or Mojave?
The OP is for Mojave. However, it can serve as a guide for Catalina as well. Just use UniBeast and MultiBeast for Catalina.
 
@dalaranunion
Just to confirm, you are making changes to the /EFI partition on the drive you installed the OS too? Not the Bootable USB.

APFS error sounds like you don't have the correct items in the EFI partition. Make sure you have all the items I listed in the proper folders. The ApfsDeiverLoader driver goes in the EFI/EFI/CLOVER/Driver/UEFI folder

Path should be EFI/EFI/CLOVER/ [then path below]

KEXT/Other Folder
  • AppleALC
  • CalDigitHDProDrv
  • EnergyDriver
  • IntelMausiEthernet
  • Lilu
  • FakeSMC
  • FakeSMC*various sensors*
Driver/UEFI Folder
  • ApfsDeiverLoader
  • AudioDxe
  • DataHubDxe
  • FSInject
  • OsxAptioFix3Drv
  • PartitionDxe
  • SMCHelper
  • vBoxHfs
ACPI/patched Folder
  • SSDT-EC
  • SSDT-PMC
  • SSDT-UIAC (aml/dsl)
  • SSD-USBX

Hello and many thanks for the list, I have managed a couple of days ago to boot and complete the instalation fine. It was my mistake as I was messing drivers in /Library/Extensions/

Do you suggest to place everything in the /EFI partition then?

What about the kexts, I thought these should be in /Library/Extentions/

or the Bootloader injects them from the /EFI/Kexts

Compared to your UEFI folder I have two extra:
- AptioMemoryFix
- EmuVariableUefi
I am going to remove these.

In regards to your Extensions I can see you have "EnergyDriver" I have seen that this is used for the fans?

ACPI/Patched Folder
I have nothing there.

All of the patches: ACPI (mattystonnie), AppleAHCIPort, 2xPort Limit are in the clover.plist file is that okay?

Again sorry for the too many questions, still new here and excited.

Thanks again.
 
Status
Not open for further replies.
Back
Top