Dell Precision Tower 3420(SFF) Clover Stuck on +++++, Opencore install Stuck on [EB|#LOG:EXITBS:START]

[coralding]

My Desktop: Dell Precision Tower 3420 SFF, Exon E3-1245 V5, DDR4 2133 8G*2 total 16G Non-ECC DDR4-SDRAM, iGPU: P530, NVMe SSD: Koxia 256G. C236 Motherboard!

I'm according to Opencore Desktop Guide of Skylake, Stuck on [EB|#LOG:EXITBS:START].

I have tried to fixed CFG-Lock using modGRUBShell.efi the value is 0xAF, offset to 0x00, DVMT Preallocate value is 0x350 offset to 0x2(64M), DVMT Total GfxMem value is 0x351, offset to 0x3(Max), and 0x1(128M), 0x2(256M). On the screenshot the CFG-Lock has been disabled or not, Can anyone tell me the CFG-Lock fixed result is suceessed or not!

Then the Kernal-Quirks AppleCpuPmCfglock-False AppleXcpmCfgLock-false.

restart the prolem is the same. My ProvideConsoleGop is true, IgnoreInvalidFlexRatio is false, AppleXcpmExtraMsrs I tried False then True, SetupVirtualMap -True, RebuildAppleMemoryMap- first using True, also tried False. the problem is the same!

The attachment are my screenshot and my Opencore OC files.

Can any one help me to solve the problem! Thanks!

 

[Namok88]

Try to add these DSDT patches (one at a time) to ACPI >> Patch

Patch #1
Table Signature: DSDT | Find: A00A9353 54415301 | Replace: A00A910A FF0BFFFF

Patch #2
Table Signature: DSDT | Find: A00A9353 54415301 | Replace: A00A9353 43535301

Try to disable RebuildAppleMemoryMap and enable SetupVirtualMap in Booter >> Quirks

 

[coralding]

Try to add these DSDT patches (one at a time) to ACPI >> Patch

Patch #1
Table Signature: DSDT | Find: A00A9353 54415301 | Replace: A00A910A FF0BFFFF

Patch #2
Table Signature: DSDT | Find: A00A9353 54415301 | Replace: A00A9353 43535301

Try to disable RebuildAppleMemoryMap and enable SetupVirtualMap in Booter >> Quirks

First thanks for your help. As you mentions, I first used Patch#1 and second Patch#2, the result is the same. and also I have tried these patch in Clover-ACPI-Patch, each with one, it doesn't work.

Can any one help me for it, I will attached my DSDT.aml and DSDT.dsl from SSDTTime's Results,Thanks!

 

[coralding]

Here is my Clover EFI files and Config.plist setup! it stuck on +++++++. I have tried all the Memory fix efi driver: AptioMemoryFix.efi, AptioMemoryFix_64.efi, OsxAptioFix3Drv.efi, OsxAptioFix2drv-free2000, OsxAptioFixDrv.efi, and so has used OcQuicks.efi OcQuirks.plist with OpenRuntime.efi. each time it stuck on the +++++++++.

 

[coralding]

My BIOS setup list below
General ->Boot Sequence-oot List Option select UEF ->Advanced Boot Options Disable Enable Legacy Option ROMs

System Configuration ->Serial Port -- Disabled ->SATA Operation -- AHCI ->USB Configuration select all>Audio select all.

Video ->Primary Display select Intel HD Graphics

Secure Boot ->Secure Boot Enable --- Disable

Intel Software Guard Extensions ->Intel SGX Enable ---Disable

Virtualization Support ->Virtualization didn't select, Enable Intel Virtualization Technology ->VT for Direct I/O--Disable Enable

 

[Namok88]

Post picture or video of Clover verbose boot where it crashes.

 

[coralding]

Hi, This is the OC screenshot, and Oclog.txt I'll post the Clover screenshot later, wait. Thanks!

 

[coralding]

The Clover screenshot is below!

 

[Namok88]

This is from Clover? Looks like a OC verbose boot.

 

[coralding]

#8 is Clover screenshot! #7 is Opencore 0.5.9