Gigabyte X299X - Catalina Support

[dolgarrenan]

Hopefully we can get some passion back into this beautiful Mac pro setup. So come on guys and lets get this running like the z390 master!

KP

panic(cpu 0 caller 0xffffff8012e4c32a): Kernel trap at 0xffffff8012e685c7, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x0000700004a7fe88, CR3: 0x000000002d350000, CR4: 0x00000000003626e0
RAX: 0x000000007e008003, RBX: 0xffffff801365dc30, RCX: 0x00000000000000e2, RDX: 0x0000000000000000
RSP: 0xffffff83dfcd3bb0, RBP: 0xffffff83dfcd3be0, RSI: 0x0000000000000003, RDI: 0xffffff801365dbd0
R8:  0x0000000000000000, R9:  0x0002bd5200000025, R10: 0xffffff806610d800, R11: 0x000000000002bd51
R12: 0xffffff80135304d2, R13: 0x0000000000000001, R14: 0x0000000000000000, R15: 0xffffff80135304b8
RFL: 0x0000000000010046, RIP: 0xffffff8012e685c7, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000700004a7fe88, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 0

Backtrace (CPU 0), Frame : Return Address
0xffffff8012b51220 : 0xffffff8012d215cd mach_kernel : _handle_debugger_trap + 0x49d
0xffffff8012b51270 : 0xffffff8012e5a3c5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff8012b512b0 : 0xffffff8012e4bf7e mach_kernel : _kernel_trap + 0x4ee
0xffffff8012b51300 : 0xffffff8012cc7a40 mach_kernel : _return_from_trap + 0xe0
0xffffff8012b51320 : 0xffffff8012d20c97 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff8012b51420 : 0xffffff8012d21087 mach_kernel : _panic_trap_to_debugger + 0x227
0xffffff8012b51470 : 0xffffff80134c2c7c mach_kernel : _panic + 0x54
0xffffff8012b514e0 : 0xffffff8012e4c32a mach_kernel : _sync_iss_to_iks + 0x2aa
0xffffff8012b51660 : 0xffffff8012e4c028 mach_kernel : _kernel_trap + 0x598
0xffffff8012b516b0 : 0xffffff8012cc7a40 mach_kernel : _return_from_trap + 0xe0
0xffffff8012b516d0 : 0xffffff8012e685c7 mach_kernel : _xcpm_perf_bias_set + 0x1c7
0xffffff83dfcd3be0 : 0xffffff8012e6885b mach_kernel : _xcpm_init + 0xab
0xffffff83dfcd3c00 : 0xffffff8012e588e1 mach_kernel : _acpi_sleep_kernel + 0x441
0xffffff83dfcd3c70 : 0xffffff7f95549c2a com.apple.driver.AppleACPIPlatform : __ZN23AppleACPIPlatformExpert13sleepPlatformEv + 0x204
0xffffff83dfcd3cc0 : 0xffffff7f9554deab com.apple.driver.AppleACPIPlatform : __ZN12AppleACPICPU7haltCPUEv + 0x75
0xffffff83dfcd3ce0 : 0xffffff801344d0e0 mach_kernel : __Z16IOCPUSleepKernelv + 0x290
0xffffff83dfcd3d40 : 0xffffff80134862d5 mach_kernel : __ZN14IOPMrootDomain15powerChangeDoneEm + 0xac5
0xffffff83dfcd3de0 : 0xffffff8013417917 mach_kernel : __ZN9IOService8all_doneEv + 0x767
0xffffff83dfcd3e50 : 0xffffff80134146ac mach_kernel : __ZN9IOService23actionPMWorkQueueInvokeEP11IOPMRequestP13IOPMWorkQueue + 0x86c
0xffffff83dfcd3ea0 : 0xffffff8013411d40 mach_kernel : __ZN13IOPMWorkQueue17checkRequestQueueEP11queue_entryPb + 0xa0
0xffffff83dfcd3ef0 : 0xffffff8013411bd9 mach_kernel : __ZN13IOPMWorkQueue12checkForWorkEv + 0xc9
0xffffff83dfcd3f30 : 0xffffff801342d43e mach_kernel : __ZN10IOWorkLoop15runEventSourcesEv + 0x11e
0xffffff83dfcd3f70 : 0xffffff801342ca36 mach_kernel : __ZN10IOWorkLoop10threadMainEv + 0x36
0xffffff83dfcd3fa0 : 0xffffff8012cc713e mach_kernel : _call_continuation + 0x2e
      Kernel Extensions in backtrace:
         com.apple.driver.AppleACPIPlatform(6.1)[06B0C2E0-18E0-3E3B-8A46-17BF2A713C34]@0xffffff7f9553e000->0xffffff7f955d8fff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[9D1FF279-C4A2-3344-902F-E0B22B508689]@0xffffff7f93aa1000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[1B1F3BBB-9212-3CF9-94F8-8FEF0D3ACEC4]@0xffffff7f93ab3000
            dependency: com.apple.driver.AppleSMC(3.1.9)[601E041E-0A5C-3B6A-A4E6-45ECC7F48A2B]@0xffffff7f93af2000

BSD process name corresponding to current thread: kernel_task
Boot args: npci=0x2000 darkwake=0 brcmfx-country=#a agdpmod=pikera keepsyms=1

Mac OS version:
19E287

Kernel version:
Darwin Kernel Version 19.4.0: Wed Mar  4 22:28:40 PST 2020; root:xnu-6153.101.6~15/RELEASE_X86_64
Kernel UUID: AB0AA7EE-3D03-3C21-91AD-5719D79D7AF6
Kernel slide:     0x0000000012a00000
Kernel text base: 0xffffff8012c00000
__HIB  text base: 0xffffff8012b00000
System model name: MacPro7,1 (Mac-27AD2F918AE68F61)
System shutdown begun: NO
Panic diags file available: YES (0x0)

System uptime in nanoseconds: 4949130430353
last loaded kext at 129202526811: @filesystems.smbfs    3.4.2 (addr 0xffffff7f9565d000, size 454656)
last unloaded kext at 226530154701: >!ASMCRTC    1.0 (addr 0xffffff7f954b5000, size 28672)
loaded kexts:
com.uaudio.driver.UAFWAudio    4.3.1 47542
com.uaudio.driver.UAD2System    9.12.1
ru.joedm.SMCSuperIO    1.1.3
hu.interferenc.TSCAdjustReset    1.1
as.vit9696.SMCProcessor    1.1.3
as.vit9696.VirtualSMC    1.1.3
as.vit9696.!AALC    1.4.9
as.vit9696.WhateverGreen    1.3.9
org.acidanthera.NVMeFix    1.0.2
com.rehabman.driver.USBInjectAll    0.7.3
meow.IOIIIO.MacProMemoryNotificationDisabler    1.0.0
as.lvs1974.HibernationFixup    1.3.3
as.vit9696.Lilu    1.4.4
@filesystems.smbfs    3.4.2
>!AUpstreamUserClient    3.6.8
>!AMCCSControl    1.11
@kext.AMDRadeonServiceManager    3.0.8
@kext.AMDRadeonX6000    3.0.8
>!AGraphicsDevicePolicy    5.1.16
@AGDCPluginDisplayMetrics    5.1.16
@fileutil    20.036.15
@filesystems.autofs    3.0
@filesystems.ntfs    3.14.3
>!AThunderboltIP    3.1.4
>!APlatformEnabler    2.7.0d0
>AGPM    111.4.4
>X86PlatformShim    1.0.0
>!A!IPCHPMC    2.0.1
>!A!IMCEReporter    115
>!AGFXHDA    100.1.426
>!AHV    1
|IOUserEthernet    1.0.1
|IO!BSerialManager    7.0.4f6
>pmtelemetry    1
@Dont_Steal_Mac_OS_X    7.0.0
>!A!ISlowAdaptiveClocking    4.0.0
>AudioAUUC    1.70
@private.KextAudit    1.0
@filesystems.apfs    1412.101.1
>!AVirtIO    1.0
@filesystems.hfs.kext    522.100.5
>AirPort.BrcmNIC    1400.1.1
@!AFSCompression.!AFSCompressionTypeDataless    1.0.0d1
@BootCache    40
@!AFSCompression.!AFSCompressionTypeZlib    1.0.0
>!AAHCIPort    341.0.2
>!AHPET    1.8
>!ARTC    2.0
>!AACPIButtons    6.1
>!ASMBIOS    2.1
>!AAPIC    1.7
$!AImage4    1
@nke.applicationfirewall    303
$TMSafetyNet    8
@!ASystemPolicy    2.0.0
|EndpointSecurity    1
>!ASMBus!C    1.0.18d1
|IOSMBus!F    1.1
@kext.AMDRadeonX6000HWLibs    1.0
|IOAccelerator!F2    438.4.5
@kext.AMDRadeonX6000HWServices    3.0.8
>!AGraphicsControl    5.1.16
@kext.triggers    1.0
|IOFireWire!F    4.7.5
>X86PlatformPlugin    1.0.0
>IOPlatformPlugin!F    6.0.0d8
|IONDRVSupport    575.1
@kext.AMDRadeonX6000Framebuffer    3.0.8
@kext.AMDSupport    3.0.8
|IOAVB!F    840.3
>!ASSE    1.0
@!AGPUWrangler    5.1.16
@!AGraphicsDeviceControl    5.1.16
|IOSlowAdaptiveClocking!F    1.0.0
|IOGraphics!F    575.1
@plugin.IOgPTPPlugin    840.3
|IOEthernetAVB!C    1.1.0
|Broadcom!BHost!CUSBTransport    7.0.4f6
|IO!BHost!CUSBTransport    7.0.4f6
|IO!BHost!CTransport    7.0.4f6
|IO!B!F    7.0.4f6
|IO!BPacketLogger    7.0.4f6
>!AThunderboltDPInAdapter    6.2.6
>!AThunderboltDPOutAdapter    6.2.6
>!AThunderboltDPAdapter!F    6.2.6
>!AThunderboltPCIUpAdapter    2.5.4
>!AThunderboltPCIDownAdapter    2.5.4
>!AHPM    3.4.4
>!A!ILpssI2C!C    3.0.60
>!A!ILpssDmac    3.0.60
>!A!ILpssI2C    3.0.60
>!UAudio    322.2
>usb.networking    5.0.0
>usb.!UHostCompositeDevice    1.2
>usb.!UHub    1.2
>!AThunderboltNHI    5.8.6
|IOThunderbolt!F    7.6.0
|IOAudio!F    300.2
@vecLib.kext    1.2.0
|IOSerial!F    11
|IO80211!F    1200.12.2b1
>mDNSOffloadUserClient    1.0.1b8
>corecapture    1.0.4
|IOSkywalk!F    1
|IONVMe!F    2.1.0
|IOSurface    269.11
@filesystems.hfs.encodings.kext    1
|IOAHCI!F    290.0.1
>usb.!UXHCIPCI    1.2
>usb.!UXHCI    1.2
>usb.!UHostPacketFilter    1.0
|IOUSB!F    900.4.2
>!AEFINVRAM    2.1
>!AEFIRuntime    2.1
|IOHID!F    2.0.0
$quarantine    4
$sandbox    300.0
@kext.!AMatch    1.0.0d1
>DiskImages    493.0.0
>!AFDEKeyStore    28.30
>!AEffaceable!S    1.0
>!AKeyStore    2
>!UTDM    489.101.1
|IOSCSIBlockCommandsDevice    422.101.1
>!ACredentialManager    1.0
>KernelRelayHost    1
>!ASEPManager    1.0.1
>IOSlaveProcessor    1
|IOUSBMass!SDriver    157.101.3
|IOSCSIArchitectureModel!F    422.101.1
|IO!S!F    2.1
|IOUSBHost!F    1.2
>!UHostMergeProperties    1.2
>usb.!UCommon    1.0
>!ABusPower!C    1.0
|CoreAnalytics!F    1
>!AMobileFileIntegrity    1.0.5
@kext.CoreTrust    1
|IOTimeSync!F    840.3
|IONetworking!F    3.4
|IOReport!F    47
>!AACPIPlatform    6.1
>!ASMC    3.1.9
>watchdog    1
|IOPCI!F    2.9
|IOACPI!F    1.4
@kec.pthread    1
@kec.corecrypto    1.0
@kec.Libm    1

You must have some problems with ACPI, check your SSDT's, besides, I don't know which hardware you have exactly, update your hardware specs? Perhaps there is a problem with boot arg in your .plist

18:915 0:005 Using load options 'boot.efi -v debug=0x100 keepsyms=1 npci=0x2000 alcid=1 '

You have been switching from clover to OC and it shows in the last line, you need to do a CMOS and re-configure your BIOS, either choose one bootloader or the other, I would stick with OC.

 

[Farid14]

So now i am stuck here can you guys have a look
X299X gigabyte master i9 10900x under clover
my bios still doing boot failure every time i boot under clover 5114 i can't migrate 5118
at least with open core i had less boot failure but wifi and bluetooth where gone

I just bought the same motherboard and cpu
And I have big problem with clover and boot failure,

In addition to this problem
I think this CPU and this motherboard are very slow and windows boot time is long,

my old motherboard and cpu (Gigabyte Z170X-UD5 … cpu i7 6700k)
boot windows 10 in 5 second

This motherboard and cpu (X299X Aorus Master … cpu i9 10900x)
Boot windows 10 in 30 second

Any idea?

Regards

 

[dolgarrenan]

I just bought the same motherboard and cpu
And I have big problem with clover and boot failure,

In addition to this problem
I think this CPU and this motherboard are very slow and windows boot time is long,

my old motherboard and cpu (Gigabyte Z170X-UD5 … cpu i7 6700k)
boot windows 10 in 5 second

This motherboard and cpu (X299X Aorus Master … cpu i9 10900x)
Boot windows 10 in 30 second

Any idea?

Regards

That's why the preferred bootloader is OC, just check first post and follow the method. It's totally normal for HEDT boards to boot slower than a Z170 for instance, the firmware has to load many more devices and that leads to more checks = slower boot.

 

[Aarongorga]

how do we fix PXSX ? and the built in?

do i need the driver for CSME HECI is it the audio ?
any idea for the driver AQC111?
I guess there's incompability for wifi6 AX200?
still have problem with prelink kernel
thanks

I am currently trying to get OC working on the same X299X Aorus Master with a 10980 CPU, but I can't get OC to load. I get and auto reset after a couple seconds. I wonder if it's a BIOS issue. Would you mind sharing your BIOS setting?

Right now I've been following what's posted in the guide:
Disable:

• Fast Boot
• VT-d (can be enabled if you set DisableIoMapper to YES)
• CSM
• Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
• Intel SGX (I can't find this setting)
• Intel Platform Trust
• CFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable both AppleCpuPmCfgLock and AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled) (I can't find this setting, but I did enable the settings mentioned)

Enable:

• VT-x (I can't find this setting)
• Above 4G decoding
• Hyper-Threading
• Execute Disable Bit (I can't find this setting)
• EHCI/XHCI Hand-off
• OS type: Windows 8.1/10 UEFI Mode

If it makes any difference I am using OC 0.5.8 DEBUG.

I've attached my EFI folder and DSDT.aml as well the screen I get when I boot. It goes from this to the OC menu. I have about 2 or 3 seconds then it reboots and tells me I had a boot failure.

I see from your posts you had a similar situation, but you seem to have found a solution.

Thanks for any help

 

[Aarongorga]

I was able to boot with OC 0.5.6 but it did not have wifi and bluetooth and tried to configure 0.5.8 not working at all as same as you

Thanks I'll give that a go. I don't need and BT or WiFi at the moment. If you happen to have the EFI folder you used I would love to take a look and compare my SSDTs etc.

Thanks

 

[Farid14]

I was able to boot with OC 0.5.6 but it did not have wifi and bluetooth and tried to configure 0.5.8 not working at all as same as you

Hi!

What about clover?
can boot with clover without boot failure?

Thanks

 

[Farid14]

Thanks I'll give that a go. I don't need and BT or WiFi at the moment. If you happen to have the EFI folder you used I would love to take a look and compare my SSDTs etc.

Thanks

Hi Aarongorga

I just bought the same motherboard and cpu 10900x
And I have big problem with clover and boot failure,

In addition to this problem
I think my cpu and this motherboard are very slow and windows boot time is long,

my old motherboard and cpu (Gigabyte Z170X-UD5 … cpu i7 6700k)
boot windows 10 in 5 second

This motherboard and cpu (X299X Aorus Master … cpu i9 10900x)
Boot windows 10 in 30 second

What is your idea?
You have any problem for speed?

Regards

 

[Aarongorga]

Hi Aarongorga

I just bought the same motherboard and cpu 10900x
And I have big problem with clover and boot failure,

In addition to this problem
I think my cpu and this motherboard are very slow and windows boot time is long,

my old motherboard and cpu (Gigabyte Z170X-UD5 … cpu i7 6700k)
boot windows 10 in 5 second

This motherboard and cpu (X299X Aorus Master … cpu i9 10900x)
Boot windows 10 in 30 second

What is your idea?
You have any problem for speed?

Regards

Hi Farid

I'm not a good person to ask about this. I have been a Mac guy for my entire life, the last Windows computer I had was a Mac on bootcamp and Windows 7, I have no reference as far as booting Windows speed.

I did notice when following the guide that we should disable fastboot in the BIOS, which was disabled by default in my case, perhaps it was enabled on your old system? I didn't time the boot up, but it seems OK. I'm used to my Mac that hasn't been turned off in 6 months, so everything is slow to me LOL.

 

[tegezee]

I have everything working including Hot plugging thunderbolt. Only thing not working is ethernet.
Geekbench score no overclock. I removed the internal wifi+BT card and used a fenvi BCM94360CD Wi-Fi 1750Mbps Bluetooth 4.0 Pci-e Card

 

[tegezee]

Went from this

to this just turning on xmp pro 1. Gonna overclock and get sleep working tomorrow. So far only probloem is boot failure. I cant get opencore to even boot to save my life.

Delete USBInjectAll.kext and use the usb mapped kext attached.