- Joined
- Mar 21, 2011
- Messages
- 801
- Motherboard
- GA-Z390-Aorus Pro
- CPU
- i7-9700K
- Graphics
- RX 590
@CaseySJ --I am trying the SSDT for my un-flashed GC-Alpine ridge card from the repository. In my config.plist I have only the _E17 rename enabled.
Upon booting, 3 times out of 4 the display as well as the display peripherals (mic, audio out, camera) work. Occasionally, the display lights up but no peripherals. Not a big deal since I can reboot and all is well again.
A USB stick via a USB-c to USB 3 dongle attached to the unused TB port on the AR does not connect.
In about this Mac--system report--Thunderbolt it shows "no drivers loaded". in --PCI it shows the Thunderbolt NHI but not the USB controller.
The TB tree in IOReg doesn't look right. Shouldn't the device be attached to ThunderboltPort5?
Attached is a screen shot of the first part of the TB tree in IOReg, the full IOReg, and my DSDT saved from MaciASL-->new from ACPI-->DSDT.
Thanks!
Upon booting, 3 times out of 4 the display as well as the display peripherals (mic, audio out, camera) work. Occasionally, the display lights up but no peripherals. Not a big deal since I can reboot and all is well again.
A USB stick via a USB-c to USB 3 dongle attached to the unused TB port on the AR does not connect.
In about this Mac--system report--Thunderbolt it shows "no drivers loaded". in --PCI it shows the Thunderbolt NHI but not the USB controller.
The TB tree in IOReg doesn't look right. Shouldn't the device be attached to ThunderboltPort5?
Attached is a screen shot of the first part of the TB tree in IOReg, the full IOReg, and my DSDT saved from MaciASL-->new from ACPI-->DSDT.
Thanks!
Attachments
Last edited: