AMD Radeon Performance Enhanced SSDT

[mattystonnie]

Slot 1 Fan spins up - Score: 64,615
Slot 2 Fan does not spin up - Score: 58,753

New, send ioreg after.

 

[yellocab]

So with 2.0:
no more that 61k with GB even after 2 wake/sleep (svandive has this f*** issue?)
4600 indigo

No fan problem
20W idle

 

[svandive]

SSDT-RX Vega 64 X2-Vers 2.1.aml
SSDT-RX Vega 64-Version 2.0.aml

Slot 1: Fan Spins up according to load: Score - 61,549
Slot 2: Fan permanently spun up: Score - 77,932

 

[mattystonnie]

SSDT-RX Vega 64 X2-Vers 2.1.aml
SSDT-RX Vega 64-Version 2.0.aml

Slot 1: Fan Spins up according to load: Score - 61,549
Slot 2: Fan permanently spun up: Score - 77,932

New.

 

[mattystonnie]

So with 2.0:
no more that 61k with GB even after 2 wake/sleep (svandive has this f*** issue?)
4600 indigo

No fan problem
20W idle

New

 

[svandive]

SSDT-RX Vega 64 X2-Vers 2.2.aml
SSDT-RX Vega 64-Version 2.2.aml

Slot 1: Fan Spins up according to load: Score - 61,354
Slot 2: Fan quiet at idle, spins up slightly during test: Score - 60,574

 

[mattystonnie]

SSDT-RX Vega 64 X2-Vers 2.2.aml
SSDT-RX Vega 64-Version 2.2.aml

Slot 1: Fan Spins up according to load: Score - 61,354
Slot 2: Fan quite at idle, spins up slightly during test: Score - 60,574

Replace only the second one and send ioreg.

 

[povlhp]

I am on an S200 with Sapphire Pulse 5600 XT on NVMe -> PCIe x4 adapter.
I have used Clover to inject a play table, and put a 5700 XT .aml in patched.
Card works, but slow fan. Silent when not under load. Works great under Windows. One hour or so of gaming (XCOM 2) on Mac, and it crashes, and the card is very hot.
Tried to make the table a copy of my Windows settings.
The big problem is, I think, that I do not have any temperature & fan data, only GPU load/available and used VRAM. So the computer does not know how to control the card. But I would expect that info to be part of some data stream from the card.
I tried the FakeSMC package with the HWMonitor2, I tried the Virtual SMC from the HWMonitor2 forum, but gives me "SMCSuperIO not found"

The S200 is manufactured by eGlobal in China and sold under many names. Little bigger thanMAc mini (twice as high), and mine with the i7-8850H.

 

[svandive]

SSDT-RX Vega 64 X2-Vers 2.2.aml -- NEW
SSDT-RX Vega 64-Version 2.2.aml

Slot 1: Fan Spun up with no Test running: Score - 79,906
Slot 2: Fan quiet at idle, spins up slightly during test: Score - 60,550

 

[mattystonnie]

I am on an S200 with Sapphire Pulse 5600 XT on NVMe -> PCIe x4 adapter.
I have used Clover to inject a play table, and put a 5700 XT .aml in patched.
Card works, but slow fan. Silent when not under load. Works great under Windows. One hour or so of gaming (XCOM 2) on Mac, and it crashes, and the card is very hot.
Tried to make the table a copy of my Windows settings.
The big problem is, I think, that I do not have any temperature & fan data, only GPU load/available and used VRAM. So the computer does not know how to control the card. But I would expect that info to be part of some data stream from the card.
I tried the FakeSMC package with the HWMonitor2, I tried the Virtual SMC from the HWMonitor2 forum, but gives me "SMCSuperIO not found"

The S200 is manufactured by eGlobal in China and sold under many names. Little bigger thanMAc mini (twice as high), and mine with the i7-8850H.

Use my SSDT RX 5700 XT for 5600 XT, read first post and use this kext for temps.