Contribute
Register

AMD Radeon Navi GPU

If you inject with clover, weg will be disabled, no need to pull.

Doh! Makes perfect sense. Iriri worked:

Screen Shot 2020-04-12 at 11.20.32 PM.png
 
Big boost, unbelievable actually.

Screen Shot 2020-04-12 at 11.34.02 PM.png


A few questions:
  1. How do I do the direct inject method? I have a working opencore EFI I would like to try and benchmark
  2. Are there other buffers to try?
  3. I had a few very faint audio blips during Geekbench, sounded like very faint scratchy sound. What is that from?
Thanks for the awesome help!
 
Big boost, unbelievable actually.

View attachment 461808

A few questions:
  1. How do I do the direct inject method? I have a working opencore EFI I would like to try and benchmark
  2. Are there other buffers to try?
  3. I had a few very faint audio blips during Geekbench, sounded like very faint scratchy sound. What is that from?
Thanks for the awesome help!


This is the headless method. Just drag and drop the correct aml file for your gpu : Vega 64, RX 5500 XT, RX 5700 XT.

Drop into EFI partition ->CLOVER->ACPI->patched.

Remove from clover config file the boot args agdpmod=pikeram, device properties should be empty, no gpu injection and no WEG.

That sound is probably because your gpu was at 100%.

Edit. : for open core bootloader just add the ssdt file and remove weg.
 

Attachments

  • SSDT-NAVI-RX5700XT.aml
    445 bytes · Views: 208
  • SSDT-VEGA-64.aml
    445 bytes · Views: 110
  • SSDT-NAVI-RX5500XT.aml
    435 bytes · Views: 127
Last edited:
This is the headless method. Just drag and drop the correct aml file for your gpu : Vega 64, RX 5500 XT, RX 5700 XT.

Drop into EFI partition ->CLOVER->ACPI->patched.

Remove from clover config file the boot args agdpmod=pikeram, device properties should be empty, no gpu injection and no WEG.

That sound is probably because your gpu was at 100%.

Is there a benefit to using the ssdt vs clover injection?
 
Back
Top