Contribute
Register

<< Solved >> [SUCCESS] CATALINA 10.15.3 HP Z440 WORKSTATIONS E5-1660 v4, SAPPHIRE NITRO+ RX 5700 XT

Status
Not open for further replies.
Today I am success install Catalina 10.15.4 beta 3 for HP Z440(E5-1620 v3, Nvidia GTX 780 Ti) with fully working fire.

View attachment 452448
Today I am success install Catalina 10.15.4 beta 3 for HP Z440(E5-1620 v3, Nvidia GTX 780 Ti) with fully working fire.

View attachment 452448

hi khoaha19

I have a small problem...


z440 E52678V3 AMD RX570 4G

thanks for the 10.15.3 EFI .

10.15.3 OK OK OK

but update 10.15.4 CPU turbo not working:cry:

can you share your 10.15.4 EFI ? Thanks in advance !!!
 
Last edited:

Attachments

  • EFI.zip
    8.9 MB · Views: 609
Last edited:
Hi Evman, thank you for your files and help. Really appreciate it. If possible could you indicate us the BIOS version and settings you are using.
I need to stay on 10.14.6 for the moment for an ongoing project, please if you could share your config.plist for 10.14.6 would be amazing I just need it for comparison.

Thanks again.
 
Hi Evman, thank you for your files and help. Really appreciate it. If possible could you indicate us the BIOS version and settings you are using.
I need to stay on 10.14.6 for the moment for an ongoing project, please if you could share your config.plist for 10.14.6 would be amazing I just need it for comparison.

Thanks again.
see here
 
Thanks Evman, I will try 10.14.6 for the moment.

Thanks again.
 
Hi Evman, I decided to go straight for 10.15.4 I am up and running. Than you very much for your help to you and you guys in this thread.

Two things I have noticed, I am using the lastest BIOS with all set to default. I was only able to see my Sata SSD if I set the storage in BIOS to AHCI, if I had it on the RAID option on the drop down menu disk utility wouldn't see the drive.

USB3 works but it only operates at USB2 speeds.

Please let me know if you guys have come across the same issue.

Thank you.
 
Hi Evman, I decided to go straight for 10.15.4 I am up and running. Than you very much for your help to you and you guys in this thread.

Two things I have noticed, I am using the lastest BIOS with all set to default. I was only able to see my Sata SSD if I set the storage in BIOS to AHCI, if I had it on the RAID option on the drop down menu disk utility wouldn't see the drive.

USB3 works but it only operates at USB2 speeds.

Please let me know if you guys have come across the same issue.

Thank you.
I haven't tried with the raid, but I'm not surprised it isn't working. You'll probably have to do some searching to see if it's possible to get the drivers for it under OSX. I have usb 3 hubs in the systems properties and get about 50 -60 Mb/s to an external WD Elements SE drive. I don't really use usb drive much though.
 
Many thank, my baby work all (usb2+usb3+turbo+sleep) on 10.15.4
Z440 with E5-2630L v3 + RX460

Dear Jrv10, you can try to add 2 files in kexts folder, and don't need any patch for usb at ACPI section
 

Attachments

  • FakePCIID_XHCIMux.kext.zip
    13.1 KB · Views: 187
  • FakePCIID.kext.zip
    13.5 KB · Views: 178
Last edited:
Status
Not open for further replies.
Back
Top