Contribute
Register

[Release] Hackintool v3.x.x

yes, I use the latest version v3.3.6 and the same thing happens
Did you export a new USBPorts.kext from the latest version? It will include USB power settings that might fix your issue.
 
Did you export a new USBPorts.kext from the latest version? It will include USB power settings that might fix your issue.
Yes, I have the same problem
 

Attachments

  • All.zip
    1.9 KB · Views: 92
v3.3.7 is not refreshing when inserting USB devices. Unable to create USBmaps. I installed the two patches in clover to remove port limit. USB2/3 works good for the most part but still want to create a custom map.

Catalina 10.15.4
USBinjectAll 0.7.3

Screen Shot 2020-04-08 at 9.30.02 AM.png
 
Hello Friends !

My rig:
Gigabyte Z370 HD3
I7 9700k
UHD 630
Not used windows 1070ti (i've used flag -wegnogpu)
Mojave 10.14.6

Tried Smbios imac 18.1 18.2 18.3(this one gives funny circles like rainbow on screen) and I've tried Mac mini 8.1

I have weird graphic glitches in applications - like this on both dvi and hdmi outputs, everything is working fine with acceleration even with 2 monitors (DVI + HDMI)

-Lilu + Whatevergreen installed
-Used Hackintool (Don't know if i did it right tho) because when using hackintool it dosnt show graphics card info - When i check inject intel in clover it does, but glitches persist :(
-No ACPI patches in clover
-Unchecked all stuff like (inject intel etc.)
-Erased all id platform stuff

In Bios - 64 dvmt preallocated (128 gives even more graphic glitches - in 128m I cant see clover configurator -its glitchy like rme app in the screeenshot)

Can someone help me please ?


Zrzut ekranu 2020-04-10 o 18.33.46.png
 
Hi. headkaze .USBPorts kext do not inject current to AppleBusPowerController (I now it can injected by SSDT-USBX )but if add value from info.plist Catalina-s AppleUSBHostPlatformProperties.kext info.plist we can injected from usbports.kext
 

Attachments

  • Screen Shot 2020-04-10 at 22.50.39.png
    Screen Shot 2020-04-10 at 22.50.39.png
    41.3 KB · Views: 132
  • Screen Shot 2020-04-10 at 23.03.59.png
    Screen Shot 2020-04-10 at 23.03.59.png
    145.2 KB · Views: 121
Last edited:
I have had no luck getting the Intel HD 530 IGPU to work with Catalina 10.15.4 on MSI laptop. It boots to Catalina with no issues, but Graphics shows "Display 8 MB" and I have tried several solutions so far to get the IGPU to work but no luck. I also don't even seen an option in the BIOS to enable/disable IGPU. The BIOS settings on this laptop are very limited.

Will the Hackintool fix this issue? With your guys expertise, what are the steps I should take when I only see "Display 8 MB?" I see others who say they see "Intel HD 530 7 MB" but I cannot even get any functionality out of the IGPU. Aside from getting the graphics and HDMI stuff to work, I also still need to figure out how to activate the sound on this laptop. Everything else is working though.

Also, I noticed that MultiBeast v8.2 for El Capitan has "Intel HD 530" as an option but that tool does not see my M.2 Samsung NVMe drive (which is what MacOS Catalina is installed to). Should I try installing El Capitan on this laptop just to see if the MultiBeast checkbox works or is the Hackintool my only hope?

Ideally, I would like to get either Mojave or Catalina to work for the sole purpose of using the dark mode when organizing my iTunes library. It's easier on my eyes and it's pretty much my only intended use for getting Hackintosh to work on my system.

Laptop Specs:

System: MSI GT73VR Titan
Skylake Processor: Intel Core i7 6820HK (HD 530)
Graphics (other): NVIDIA GTX 1080
 
Last edited:
I have been using Hackintool 3.4.0 to set my USB ports and was a little confused when to set usb C ports to “TypeC+Sw” or “TypeC”

I am confused by what is meant in the help section about both orientations?

"If it uses the same HSxx/SSxx in both orientations"

Does this mean when you swap the cable around it changes from usb 3 to usb 2 or when a usb c port is also a thunderbolt port or referring to the power?

I am currently setting up Asrock Z390 phantom itx and connecting the USB 3 internal header to a USB C port on the from of my Streacom DA2 the usb 3 port is usb 3.1 Gen 1 on the board and on the case.

Could any body enlighten when to use “TypeC+Sw” or “TypeC”
 
I am confused by what is meant in the help section about both orientations?

"If it uses the same HSxx/SSxx in both orientations"

Does this mean when you swap the cable around it changes from usb 3 to usb 2 or when a usb c port is also a thunderbolt port or referring to the power?
It means when the cable uses HS01/SS01 in one orientation and uses something else like HS02/SS02 in a different orientation.
 
I’m very new to all this and been trying everything I can. I have a NUC8I7BEH that works perfectly over HDMI and thunderbolt (DP). But I want to add a Razer Core X Chroma and 5600 XT over thunderbolt.

When I boot it stalls on ioconsoleusers gioscreenlockstate 3 but then finally boots. After that it gets decent scores in geekbench but the screen freezes for asplit second every few seconds. I’m not using any of the USB ports on the chroma yet.

Has anyone got experience with graphics card causing stuttering like this?
 
Back
Top