- Joined
- May 25, 2012
- Messages
- 18
- Motherboard
- Gigabyte GA-H97N-WIFI
- CPU
- i7-4770S
- Graphics
- RX 580
Hi there.
Okay, I would suggest you remove FakePCIID_XHCIMux.kext, FakePCIID.kext and USBInjectAll.kext from L/E and rebuild your kext caches with the Terminal command:
Code:sudo kextcache -i /
Once done put only USBInjectAll.kext in the EFI partition EFI/CLOVER/kexts/Other folder. If you need FakePCIID.kext for any other reason put it there also, otherwise don't bother. Do not re-install FakePCIID_XHCIMux.kext.
That should straighten up the XHCI controller.
The only reason to use the "-uia_ignore_rmcf" boot-command with USBInjectAll.kext is if you want to disable an already installed SSDT-UIAC.aml patch.
Come back to us once those steps have been taken
Yeah, now we're talking!
Just few questions left:
Reboot and plug it in again worked, now is correctly seen as 5Gbps! Tomorrow I'll test all the ports.
- Why bother with FakePCIID.kext and FakePCIID_XHCIMux.kext at all? What's the advantage to move all the USB 2.0 control to EHCI if XHCI is capable of handling it? Is the 15 USB port cap determined by EHCI+XHCI ports?
Last edited: