[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[blackdir]

I followed this guide and now Im using Catalina. I have an USB wifi Comfast CF-811AC. But when i tried to install https://github.com/chris1111/Wireless-USB-Adapter-Clover, icon usb-wifi in top bar show "No-USB wifi plugin", what should i do to fix it? Im using HP Probook 440 G4

I'm using a different device (generic cinese USB Wifi dongle) but is working fine as soon as I plug it in..
Did you try to install latest driver (clover version) and to remove old kext from /L/E if there?

Otherwise my suggestion is that you better check with developers of the drivers as it is not related specifically to Rehabman EliteBook procedure... just my 2c

 

[blackdir]

Now I'd like to update to 10.14.6 and I read it is important to update clover.. @RehabMan is it OK if I update it using standard 5103 version? I'm asking because my current clover is your variation

Second question: is catalina (10.15.3) fully supported on my device? if so, are there any requested changes to be done before updating to it?

BUMP

sorry to bother... can anyone confirm if it is required / good to update @RehabMan Clover with latest standard clover (v 5103) before updating to 10.14.6 ?
And if it is ok to update to Catalina after that...

thanks a lot!

 

[Feartech]

BUMP

sorry to bother... can anyone confirm if it is required / good to update @RehabMan Clover with latest standard clover (v 5103) before updating to 10.14.6 ?
And if it is ok to update to Catalina after that...

thanks a lot!

you need to update your clover to latest for Catalina

 

[Johniekul]

Hey anyone using hp probook 450 G4? If there's have you updated bios to the latest version? Thanks

 

[blackdir]

you need to update your clover to latest for Catalina

Thank you! I Just wanted to be sure

 

[EdwardGeo]

Short discussion for High Sierra here:
NVIDIA QUADRO M2000M Sucess on HP Zbook G3 15

I have done some rendering tests on M2000M and GTX 1080 In Davinci Resolve 16!
Here are the results:

 

[acquarius.13]

Hey anyone using hp probook 450 G4? If there's have you updated bios to the latest version? Thanks

I have a G5 and with the latest bios update I cannot boot anymore. Boot reaches the complete full bar, but system hangs there

 

[kimseokho24]

I have a G5 and with the latest bios update I cannot boot anymore. Boot reaches the complete full bar, but system hangs there

you can downgrade your bios version if you want.

 

[blackdir]

hello, I updated clover as suggested to 5103, upgraded macos to 10.14.6 and applied latest apple updates fo that release and everything was fine...
Than I checked latest available versions of kext and discovered that my (working) VoodooPS2Controller.kext was not updated and I downloaded 2.1.2 installed it in clover and removed my old kext from /L/E

now my touchpad is not working anymore, nor the small trackpoint in the keyboard

Unluckely I'm so stupid that I don't have anymore the old VoodooPS2Controller.kext file
I'm now stacked with an external mouse....

does anyone with a HP Elitebook 820 G1, have the proper driver to make touchpad work?

[UPDATE] Solved by mysef... I downloaded latest Rehabman RehabMan-Voodoo-2018-1008.zip and installed in both clover and /L/E. Everything is back working...

 

[en5ca]

you can downgrade your bios version if you want.

Hi! I also have 450 G5. Upgraded to latest bios (1.10), and doesn't boot anymore. Downgraded to 1.09, but still no luck.