SUCCESS Catalina 10.15.3 Z97 DELUXE + Shap. Pulse rx 580 8GB + r9 290x - full hevc h264

[furion3000]

UPDATE 14/03/2020
optimized audio and enable hdmi audio to amd rx580 update kext to efi folder
jack audio out is black and orange

mainboard asus Z97-DELUXE ver 1.xx BIOS 3503
intel i7 4790k haswell
HD4600 - disable to bios
32 gb ram
AMD Radeon RX 580 8gb pulse Shap. boot efi ok
r9 290x 4 gb shappire triple-x - ok
wifi - ok
bt - ok
usb Intel Z97 chipset - ok
ASMedia USB 3.0 controller - ok
lan 1 - Intel® I218V - ok
lan 2 - Intel® I211-AT - ok
ssd samsung 860 evo - OSX
full usb
hevc+h264 test conversion ok
SMBIOS IMAC PRO 1.1 or MAC PRO 7.1
Apple tv - ok
Finalcut - ok
Safari - Amazone prime - block frezer , i'am use Firefoxe
Quicktime hevc decoder - ok
Netflix - not tested

DSDT - SSDT

patch for dsdt asus z97 deluxe

 

[Jsalexjs]

this is great thanks! Is the DSDT patch already installed in your efi folder or do I need to place it anywhere?

 

[furion3000]

this is great thanks! Is the DSDT patch already installed in your efi folder or do I need to place it anywhere?

is installed in efi - clover patch

the file z97 deluxe patch, is txt fiel to use for magiiasl

 

[almusaka]

wifi - ok

How did you get Wifi work?

mine didn't work fine

 

[furion3000]

How did you get Wifi work?

mine didn't work fine

hi
you pc hardware ?

configuration clover and kext use in folder ?

you have use my kext ?
have generate smbios and save in clover?

what's the problem?
does not connect.
does not receive ip addresses

this configuration is tested in z97 chips (intel 9 serie).
chips wifi is integrated on board

 

[almusaka]

hi
you pc hardware ?

configuration clover and kext use in folder ?

you have use my kext ?
have generate smbios and save in clover?

what's the problem?
does not connect.
does not receive ip addresses

this configuration is tested in z97 chips (intel 9 serie).
chips wifi is integrated on board

ROG STRIX B360-I GAMING
I use I9-9900k

 

[amaroaverna]

thanks friend,

i installed catalina 15.3 on my samsung evo 860 and i used your efi folder.

it seems that everything works, I have not made any changes to the clover folders and I have configured the bios as described in the update of February 14

maybe I did not select the bios correctly because sometimes the system reboots, what could it be?

my configuration
- z97 deluxe
- i7 4790k
-16 gb ram 1866 (xpm profile 1)
- hd 4600
- no graphic card yet


thanks

 

[jbravo14]

Thanks for The EFI folder! It was able to fix my problem on my new install Catalina.

I have an Asrock Z97-E ITX with i7-4770K with Vega 56 (Firmware flashed to run as a Vega 64).

It works perfect with only a single monitor hooked up, but once I plug in a 2nd monitor, the whole system encounters intermittent crashes. Have you guys encountered this?

Clueless on how to fix this, I have already played around with the config files I had in Mojave that did not have not have such problems.

 

[alberbrando]

As I can see in your Clover Folder there are many plist configuration.Which one do you use?
Another question:How have you added your AMD 580 into Graphic section in clover( I mean IOPCIPrimaryMatch and IOPCISubDevId,VRAM and Ports numbers? Where do you collect the info from?)
I have the same graphic card and I would like to get it right as yours.
Thanx.

 

[alberbrando]

Well, I guessed the first questions.My new question is that I have seen in your 'System Report PCI Devices' is filled with your PCI Devices names ,how have you made it?? Thanks.