Looks like that did the trick!
This was actually quite similar to the bug we found some time back where disks would be incorrectly matched due to not being properly terminated.
In your particular case the issue arose because your source volume disk has the number "1". Your system has 10 disks (after virtual disks are counted) and in one particular scenario we were trying to look for something called "disk1". Due to not properly terminating this string with a space at the end, the script would match the actual "disk1" as well as "disk10". This would then lead to the behavior you initially saw.
I have since fixed this issue in
my repository and the script should now work properly for you.
@CaseySJ this is important for you as well since we now have to issue
EFIClone-v5.sh.
This also goes to show that my argument about never shipping EFIClone with TEST_SWITCH="N" by default has some leverage so I'd recommend we leave it enabled by default.
@edunon I would recommend you wait for Casey to update the script in the actual backup mini-guide and then try that version on your system again. If it works fine with the test switch
activated and actual file synchronization output looks reasonable, you should be good to enable it for real.