Contribute
Register

<< Solved >> RX 580 Graphics Problem

Status
Not open for further replies.
Joined
Jun 16, 2019
Messages
47
Motherboard
Gigabyte Z390 Gaming X
CPU
i7-9700
Graphics
UHD 630
I installed Catalina, but Graphics don't work correctly.

Screen Shot 2020-02-26 at 7.24.03 AM.png


1. In Unibeast Graphics Configuration Step, I didn't select ATI.
Did I have to select ATI for RX 580?

2. This is my CLOVER and Library/Extensions(I copied AMD9500Controller.kext and WhateverGreen.kext)
How can I solve this?
Screen Shot 2020-02-26 at 7.27.53 AM.png
 

Attachments

  • CLOVER.zip
    2.4 MB · Views: 119
Last edited:
AMD9500Controller.kext is unnecessary. Your SMBIOS is empty that I wonder what model your macOS describes.

Try removing that kext and adding the complete SMBIOS description via Clover Configurator.
 
Thanks for your reply. Did you select ATI in Unibeast Graphics Configuration Step?
I have RX 580 but checked inject Intel in Clover Configurator.
Screen Shot 2020-02-27 at 12.34.50 AM.png
 
Last edited:
Thanks for your reply. Did you select ATI in Unibeast Graphics Configuration Step?
I have RX 580 but checked inject Intel in Clover Configurator.
View attachment 451774
Inject ATI is for very old ATI GPUs. Neither my RX 580 nor HD 7850 require that. My Inject Intel is selected by default, although my SMBIOS is iMacPro1,1.
 
I changed SMBIOS, but it doesn't fix yet.
Screen Shot 2020-02-27 at 9.18.49 AM.png

Screen Shot 2020-02-27 at 9.19.49 AM.png
 
Hi @Bustycat
Thanks for your reply.
My Clover/Kexts/Other folder is empty.
So I tested several cases including move Lilu and WhateverGreen from Library/Extensions/ to Clover/Kexts/Other, but I couldn't fix it.
 
Last edited:
Screen Shot 2020-02-27 at 4.11.42 PM.png


I think Lilu and WhateverGreen are not working.

/Library/Extensions/WhateverGreen.kext does not authenticate; omitting.
/Library/Extensions/Lilu.kext does not authenticate; omitting.

How can I fix it?
 
@jiny505,

Please try the following:
  • Delete AMD9500Controller.kext from /Library/Extensions and run Kext Utility to rebuild the kernel cache.
  • Install latest Lilu, WhateverGreen, and AppleALC into /Library/Extensions (if not already done).
  • Then mount EFI partition of the macOS SSD, backup the existing CLOVER folder and copy the attached version in its place (rename the folder to CLOVER).
  • Ensure that your display monitor is connected to the RX 580 and that nothing is connected to any video ports on the rear IO panel.
    • In BIOS, set Initial Display Output to PCIe 1 Slot.
  • Reboot and check "About this Mac" to see if the RX 580 is recognized.
You should also create a custom USB port map by following this guide:
 

Attachments

  • CLOVER-jiny505.zip
    3.8 MB · Views: 128
@jiny505,

Please try the following:
  • Delete AMD9500Controller.kext from /Library/Extensions and run Kext Utility to rebuild the kernel cache.
  • Install latest Lilu, WhateverGreen, and AppleALC into /Library/Extensions (if not already done).
  • Then mount EFI partition of the macOS SSD, backup the existing CLOVER folder and copy the attached version in its place (rename the folder to CLOVER).
  • Ensure that your display monitor is connected to the RX 580 and that nothing is connected to any video ports on the rear IO panel.
    • In BIOS, set Initial Display Output to PCIe 1 Slot.
  • Reboot and check "About this Mac" to see if the RX 580 is recognized.
You should also create a custom USB port map by following this guide:


Thank you very much. I am testing this and reply soon.
 
Status
Not open for further replies.
Back
Top