Contribute
Register

<< Solved >> Vega 64 Stuck at ACPI Error on Boot

Status
Not open for further replies.
Joined
Nov 21, 2017
Messages
27
Motherboard
Gigabyte AORUS Z390 PRO
CPU
Intel I9-9900k
Graphics
Gigabyte 5700XT
Mac
  1. iMac
I have been running Catalina 10.15.3 without any issues on my build:

Intel i7-7700K
ASUS PRIME Z270-A
RX 580

I decided to upgrade and got an Asus Arez Strix Vega 64.

So I swapped the card and tried booting, however, I am getting ACPI Error on boot with what looks like multiple different problems. (Image attached)

I will also attach my EFI folder, as I assume that the issue is most likely in the config file.

Has anyone encountered this before or understands the problem that can help? Also if you might have a similar setup running with vega 64 on Catalina, perhaps you can share your EFI so I could try it out.

Thanks, any help is greatly appreciated.
 

Attachments

  • IMG_2586.jpg
    IMG_2586.jpg
    3.5 MB · Views: 45
  • az EFI.zip
    6.6 MB · Views: 45
I have been running Catalina 10.15.3 without any issues on my build:

Intel i7-7700K
ASUS PRIME Z270-A
RX 580

I decided to upgrade and got an Asus Arez Strix Vega 64.

So I swapped the card and tried booting, however, I am getting ACPI Error on boot with what looks like multiple different problems. (Image attached)

I will also attach my EFI folder, as I assume that the issue is most likely in the config file.

Has anyone encountered this before or understands the problem that can help? Also if you might have a similar setup running with vega 64 on Catalina, perhaps you can share your EFI so I could try it out.

Thanks, any help is greatly appreciated.

Please try this config.plist.
 

Attachments

  • config.plist
    24.9 KB · Views: 67
That worked! Thank you.

What did you change in the file?

config.plist > ACPI was a complete mess and I cleaned it up.
I also enabled SIP.
 
Status
Not open for further replies.
Back
Top