your laptop has a guide:
Overview The purpose of this guide is to provide a step-by-step guide to installing Mojave, High Sierra, Sierra, El Capitan, or Yosemite on the ProBook/EliteBook/Zbook equipped with Intel graphics. Note: For Broadwell and Skylake hardware, you must install at least 10.11. Broadwell support in...
www.tonymacx86.com
I also saw in the guide that this happened:
Final config.plist
Up to now, you've been using the same config.plist we were using for installation. After all the ACPI files are in place (previous two steps), you're ready to use the final config.plist from the probook repo.
First, mount the EFI partition:
Code:
cd ~ / Projects / probook.git
./mount_efi.sh
The config.plist you use from the project depends on your hardware. All plist files are located in the ./config folder. You can see what is there:
Code:
cd ~ / Projects / probook.git
ls config
As I write this, current content:
Code:
config_1020_G1_Broadwell.plist config_4x0_G4_Kabylake.plist config_8x0_G4_Kabylake.plist
config_1030_G1_Skylake.plist config_4x0_G5_Kabylake-R.plist config_8x60p.plist
config_1040_G1_Haswell.plist config_4x30.plist config_8x70p.plist
config_1040_G3_Skylake.plist config_4x40.plist config_9x70m.plist
config_1050_G1_KabyLake-R.plist config_5x30m.plist config_9x80m.plist
config_2x60p.plist config_6x0_G1_Haswell.plist config_ZBook_G0.plist
config_2x70p.plist config_6x0_G2_Skylake.plist config_ZBook_G1_Haswell.plist
config_3x0_G1.plist config_6x60p.plist config_ZBook_G2_Broadwell.plist
config_4x0_G0.plist config_6x70p.plist config_ZBook_G2_Haswell.plist
config_4x0_G1_Haswell.plist config_8x0_G1_Haswell.plist config_ZBook_G2_Haswell_ALC280.plist
config_4x0_G1_Ivy.plist config_8x0_G1_Ivy.plist config_ZBook_G3_Skylake.plist
config_4x0_G2_Broadwell.plist config_8x0_G2_Broadwell.plist readme.txt
config_4x0_G2_Haswell.plist config_8x0_G2_Haswell.plist
config_4x0_G3_Skylake.plist config_8x0_G3_Skylake.plist
but honestly I don't know where to get those config.plist