- Joined
- Jul 11, 2018
- Messages
- 4
- Motherboard
- Gigabyte Z370 HD3 (rev. 1.0)
- CPU
- Intel Core i3-8100 Box
- Graphics
- Intel UHD Graphics 630
Hi everyone ! This is my first post, i begin hackintosh with this build with High Sierra. After with Mojave , and now i decide to post this build with Catalina. There they are the steps that i make to setup Catalina with last update and all works perfectly!
First of all BIOS settings are the classics, VD-T disable etc
Step 1: I make a bootable usb stick with Unibeast for Catalina
Step 2: I install mac os with no extra drivers
Step 3: Once you get in Mac , download multibeast for Mojave (yes it works, from there you can take drivers for native audio support)
and Clover Configurator
Step 4: Open Clover Configurator and from the list left, select Mount EFI both for usb and your Mac OS disk. Then delete EFI folder from your MacOS drive and replace it with EFI folder from your usb stick. Then, inside your CLOVER folder there is a file "config.list", open it with clover configurator to set up UHD graphics acceleration. Once you open see my screenshots what i have check and do the same. Save and Exit . And Finally
Step 5: Open Multibeast for Mojave and select: Drivers-->Audio-->AppleALC and Optional 3 port (native)audio and click build and install
Reboot your system and all must works correctly
I hope this post help you
First of all BIOS settings are the classics, VD-T disable etc
Step 1: I make a bootable usb stick with Unibeast for Catalina
Step 2: I install mac os with no extra drivers
Step 3: Once you get in Mac , download multibeast for Mojave (yes it works, from there you can take drivers for native audio support)
and Clover Configurator
Step 4: Open Clover Configurator and from the list left, select Mount EFI both for usb and your Mac OS disk. Then delete EFI folder from your MacOS drive and replace it with EFI folder from your usb stick. Then, inside your CLOVER folder there is a file "config.list", open it with clover configurator to set up UHD graphics acceleration. Once you open see my screenshots what i have check and do the same. Save and Exit . And Finally
Step 5: Open Multibeast for Mojave and select: Drivers-->Audio-->AppleALC and Optional 3 port (native)audio and click build and install
Reboot your system and all must works correctly
I hope this post help you
Attachments
-
Screenshot 2020-02-01 at 9.01.07 AM.png4.3 MB · Views: 1,336
-
Screenshot 2020-02-01 at 9.21.52 AM.png185.1 KB · Views: 1,314
-
Screenshot 2020-02-01 at 9.22.14 AM.png107.6 KB · Views: 1,059
-
Screenshot 2020-02-01 at 9.22.28 AM.png147.8 KB · Views: 974
-
Screenshot 2020-02-01 at 9.22.48 AM.png142 KB · Views: 1,013
-
Screenshot 2020-02-01 at 9.23.02 AM.png147 KB · Views: 1,068
-
Clover_Install_Log.txt1.7 KB · Views: 455