[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[tdcam]

Can I use your guide with I9 9900KF? It does not have IGPU but I did not found other guide. What should I change in order to do it with Radeon RX 560 instead of internal graphic card(wich I do not have integrated in CPU).

yes works fine the mini guide has an amd plist he wrote for this application

 

[epyonxero]

At the very top right of the webpage is the search icon. Please enter “alphabetical” as the search keyword, “CaseySJ” for member, and from the pop-up menu choose “This thread”.

You’ll find about 12 or 13 answers to this question!

Thanks

 

[galisrule]

Does anyone able to get Apple TV to work without have to disable IGPU please anyone?
If so please share your secret

 

[heyelly]

Another detail about my issue: no matter what settings I have in the energy saving panel, the computer freezes after 5-6 mins of no usage. Memtest says RAM is ok, no issues at all under Windows. Any other idea?

 

[Deleted member 2343495]

Please start in safe mode (add -x to boot-args) and see if the freeze happens there too after 5-6 mins idle.
It sounds weird but also check your screen saver and ensure that you choose one that is also available in safe mode too.

 

[mazop89]

Hello all, I'm trying to install Mojave in my new Hackintosh but the 2nd phase of the installation freezes at the beginning of the progressing bar (About 15 minutes stays like that). In the tuto of CaseyCS I wrote that they could be matters with the Samsung Evo Plus and I've got a 970 Evo Plus NVME.M2. According to the tuto and other discussions in the forum, I have to upgrade it to make it work. But in the tuto I don't understand HOW to upgrade the samsung firmware. My SSD is plugged inside my case. Can I upgrade it from here or have I to unplugged it and use a different computer for this ? Could someone help me ?
Thank you very much !

 

[heyelly]

Please start in safe mode (add -x to boot-args) and see if the freeze happens there too after 5-6 mins idle.
It sounds weird but also check your screen saver and ensure that you choose one that is also available in safe mode too.

I cannot start Catalina properly in safe mode, I got black screen after one second with the Apple logo and the progress bar.

 

[heyelly]

I cannot start Catalina properly in safe mode, I got black screen after one second with the Apple logo and the progress bar.

With HDMI I can boot properly. Let's try.

 

[kwalter]

Does anyone able to get Apple TV to work without have to disable IGPU please anyone?
If so please share your secret

Yes, it's working on my system along with IGPU and Sidecar
I don't know if it's your problem, but I use AptiomemoryFix not the latest FwRuntimeServices.efi and OcQuirks-4.efi
I found NVRAM didn't seem to work with that memory management system
Worth a try, but a lot of people don't seem to be able to get AptiomemoryFix to work. It always has for me - why I don't know

 

[CaseySJ]

@CaseySJ I've made the adjustments from the post. I also went in and tried to see if it was something with the ACPI file the disables the onboard WiFi chip. Only because that was something I didn't have in my original build that didn't have the sleep issue. Is there any other suggestions as to what I could try? I've tested it a couple times, and I just left the computer on for a period of time. Normally between the 5-10 min mark, it shutdown and goes back to the Clover menu.

Christmas Eve and Christmas Day kept me fully occupied with family matters, but I'm back... Is this still happening? I still don't know why it was so difficult to install macOS -- you exchanged/replaced nearly all components. I could examine your CLOVER folder, but I'm not sure how much that would reveal. But let's start there anyway. Please compress and upload your CLOVER folder (remove serial numbers from SMBIOS).