[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[CaseySJ]

Thank you @CaseySJ, but mu question was, which ones enable to test/trace IGPU on Intel Power Gadget and to do test with Geekbench?

Did you check my post about the topic?

I have read several forums, discussed various people and everyone seems to "know" what is the preferred/right/correct etc Platform ID. But the only one that enables IPGU for computing on various apps seems to be 0x3E9B0007. Can you proof that 0x3E980003 works for you on Geekbench?

• Platform ID 0x3E9B0007 enables video output from the iGPU.
• Platform ID 0x3E980003 disables video output.
• Both of these Platform IDs enable compute operations on the iGPU.
• Both of these Platform IDs can be used to run GeekBench.

With either Platform ID 0x3E980003 or 0x3E9B0007 we can play back the Sony 4K Camp video to observe iGPU loading in Intel Power Gadget.

Geekbench can perform OpenCL and Metal benchmarks (Compute --> Compute Device) with both AMD GPUs and iGPU. It might be necessary to purchase a license in order to switch GPUs (or remove/disable one of the GPUs).

 

[CaseySJ]

Updated from Mojave to Catalina and neither Bluetooth nor Thunderbolt are working. What should I do?

• First, turn off the system and flip power switch on PSU to OFF for 10 seconds. Power back on.
  • Are Bluetooth and Thunderbolt working now?
• If not, download and run IORegistryExplorer and select File --> Save As....
  • Then post the saved file. It will give us a closer look at your system configuration.

 

[Rag]

Good Morning, can anyone tell if this card would work in Raid 0 on hackintosh. Or someone would tell me a card with 8 hd's to work on RAID 0

https://www.amazon.com/gp/product/B00V2RVVAS/?tag=tonymacx86com-20

 

[thegubatoshchamp]

`

 

[rondark]

Looking for information...
I am running 10.15.2 / iMac 19.1 and everything works fine and will not sleep.
On the same machine, on an old HDD I have Mojave so that I can boot from it and run AVID Media Composer. It works fine and sleeps.
I have the same drives and USB devices connected in each instance. Obviously different programs installed.
Lilu and WEG updated on both.
I am running FwRuntimeServices.efi and OcQuirks-4.efi on both configurations.

I know it is a big ask but...what are the most likely mechanisms preventing 10.15.2 from sleeping?
I would like to understand.

Cheers

 

[TAPSOUNDS]

Followed all the steps but the EFI partition is not created on my USB.
have tried several times with different versions of clover...

EDIT: JUST MADE IT!
THANK YOU SO MUCH.

 

[Phunk80]

Followed all the steps but the EFI partition is not created on my USB.
have tried several times with different versions of clover...

How did you try to mount the EFI Partition?

 

[CaseySJ]

Followed all the steps but the EFI partition is not created on my USB.
have tried several times with different versions of clover...

Please see the highlighted sections of Step 1 below:

The main build guide (Post #1) also contains the same information:

 

[iLikeHackintosh]

• Both of these Platform IDs can be used to run GeekBench.

Please could you share a screenshots like are my screenshots in my post, but instead you using 0x3E980003, because with this ID Geekbench doesn’t offer fo r me an option to test IGPU, either Intel Power Gadget.

Thank you in advance!

 

[CaseySJ]

Good Morning, can anyone tell if this card would work in Raid 0 on hackintosh. Or someone would tell me a card with 8 hd's to work on RAID 0

https://www.amazon.com/gp/product/B00V2RVVAS/?tag=tonymacx86com-20

There's no explicit mention of Mac compatibility in that card's description. Have you looked into the following:

• 8-port GloTrends with software RAID (macOS can do RAID 0) -- this is a x2 card (needs a long slot)
• 10-port Ableconn -- also a x2 card.
• 8-port Syba, but it's a x1 card.