Contribute
Register

Asus X299 - Catalina Support

Status
Not open for further replies.
Hello @Loloflatsix. A question, for the patch of USBs as you have done, they work for me to update but some USB 3 works like 2.
I have a 5700 XT. Should I use WEG? Should I change the SMBIOS to 7.1?
Thanks.
I keep my kexts and my High Sierra SSDTs, minus that of my previous graphic Nvidia.

WEG.kext is not needed any more.
I use Kgp XHCI kext by editing info.plist for MacPro 7,1.

Capture d’écran 2019-12-12 à 18.28.21.png

Hey guys.

I tried SMBIOS MacPro7,1 today. Everything runs very well except system will pop-up memory error warning while login.

Memory Modules Misconfigured

I am using OpenCore. Anyone know how to solve this issue?

Thanks.

I use Clover 5100 with VirtualSMC.kext , and I got the same message after login.
 
I'd say it is only needed if while trying to install you get the "this device is not supported in this platform" message in verbose mode, just after loading installation from clover. For instance what happened with 10.13.5 and SMBIOS 19,1.

I haven't tried moving to that SMBIOS, I'd say X299 is much similar to the iMacPro architecture than that of a MacPro7,1 which would be more similar to a C621 chipset, thus I believe it would make no benefit. In my case, I have some software which is hard linked to my system ID and serial, so changing would only have me having to authorize everything again.
Got it. Thanks my friend
 
WEG.kext is no more needed.
I use Kgp XHCI kext by editing info.plist for Macpro 7,1

View attachment 440096


I use Clover 5100 with VirtualSMC.kext , and I got the same message after login.

I use Clover 5100, but I'm still with FakeSMC. I tried not to use WEG but I got a black screen.

Will it be to use FakeSMC? or to use SMBIOS iMacPro1,1? I use DisplayPort.
 
I use Clover 5100, but I'm still with FakeSMC. I tried not to use WEG but I got a black screen.

Will it be to use FakeSMC? or to use SMBIOS iMacPro1,1? I use DisplayPort.
You could try the following, open your .plist with CC, go to graphics and enable "Inject ATI", save and close CC, open your .plist with Xcode or PlistEditor Pro and instead of removing the "Inject ATI", select NO, (should be on YES)... Save your .plist and give it a try.

For some reason Clover seems to load the Inject ATI by default, and setting it to NO has made the trick for me. Give it a try.
 
Strange network issue when using istats menu with Catalina....if i enable net menu while with Mojave and previous osx rel i had the right download or upload speed shown, with Catalina download speed (ex 200MB) is not shown correctly...but always max 120kb. Anyone has tried?
 
You could try the following, open your .plist with CC, go to graphics and enable "Inject ATI", save and close CC, open your .plist with Xcode or PlistEditor Pro and instead of removing the "Inject ATI", select NO, (should be on YES)... Save your .plist and give it a try.

For some reason Clover seems to load the Inject ATI by default, and setting it to NO has made the trick for me. Give it a try.

I have reviewed and made a test, using xcode, without weg and with inject ati in YES and NO,

It didn't work in any of the ways, I don't know if I'm doing something wrong
 
I use Clover 5100, but I'm still with FakeSMC. I tried not to use WEG but I got a black screen.

Will it be to use FakeSMC? or to use SMBIOS iMacPro1,1? I use DisplayPort.
Here is a screenshot from my EFI Folder :
- In drivers64UEFI : SMCHelper.efi
- In kexts/Other/ : VirtualSMC.kext , VegaGraphicsFixup.kext (No WEG.kext)

Capture d’écran 2019-12-13 à 18.43.24.png
 
Here is a screenshot from my EFI Folder :
- In drivers64UEFI : SMCHelper.efi
- In kexts/Other/ : VirtualSMC.kext , VegaGraphicsFixup.kext (No WEG.kext)

View attachment 440297
Hello @Loloflatsix , the USBs work now.
I just did a test. I have returned to the BIOS 1503 of ASUS. I have put WEG 1.3.5 and now it works. Before version 1.3.5 did not work.

In Graphics do you use Inject ATI?

What is eficheckdisabler.kext? Speed up the load?

In the photos I show you what I use.

With VirtualSMC, see temps 5700 XT?

Very thanks.
 

Attachments

  • Captura de pantalla 2019-12-13 a las 19.02.35.png
    Captura de pantalla 2019-12-13 a las 19.02.35.png
    13.9 KB · Views: 63
  • Captura de pantalla 2019-12-13 a las 19.03.12.png
    Captura de pantalla 2019-12-13 a las 19.03.12.png
    35.4 KB · Views: 63
Status
Not open for further replies.
Back
Top