- Joined
- May 10, 2011
- Messages
- 70
- Motherboard
- ASUS X99-A II
- CPU
- i7-6850K
- Graphics
- RX 580
- Mac
- Mobile Phone
I updated my X99 system from High Sierra to Catalina running a Nvidia 1060. The display worked fine in Catalina, but without graphics acceleration of course. When I found out that there are no Nvidia drivers for Catalina, I bought Tonymac's recommended Sapphire RX 580 Pulse.
I thought I was just going to plug in the card and be up and running. But, I am getting no display signal, but the system is fully booting. I have tried both HDMI ports and both DisplayPorts. My monitor has DisplayPort 1.2 and HDMI 2.0 enabled, the Dell UP3214Q.
I am running Clover 5098, Lilu 1.3.9 and WhateverGreen 1.3.4. All conflicting clover drivers and Kexts have been removed - I have attached my Clover folder. CSM has been disabled in the BIOS.
I tried with and without Injecting Intel=true and ATI=true with Orinoco for the frame buffer, but both result in no signal. I have tried both iMac18,3 and iMacPro1,1 Smbbios.
According to this thread: Solved> Sapphire RX580 Pulse - No video from HDMI, the RX 580 should work without any further patching or injections as long as I am using current versions of Lilu and WhateverGreen.
Any help would be super appreciated! It took me most of a week just getting this system up and running Catalina from High Sierra. Now I just need a display and I am all set!
I thought I was just going to plug in the card and be up and running. But, I am getting no display signal, but the system is fully booting. I have tried both HDMI ports and both DisplayPorts. My monitor has DisplayPort 1.2 and HDMI 2.0 enabled, the Dell UP3214Q.
I am running Clover 5098, Lilu 1.3.9 and WhateverGreen 1.3.4. All conflicting clover drivers and Kexts have been removed - I have attached my Clover folder. CSM has been disabled in the BIOS.
I tried with and without Injecting Intel=true and ATI=true with Orinoco for the frame buffer, but both result in no signal. I have tried both iMac18,3 and iMacPro1,1 Smbbios.
According to this thread: Solved> Sapphire RX580 Pulse - No video from HDMI, the RX 580 should work without any further patching or injections as long as I am using current versions of Lilu and WhateverGreen.
Any help would be super appreciated! It took me most of a week just getting this system up and running Catalina from High Sierra. Now I just need a display and I am all set!