hey
@bbst (or anyone else):
within your bios have you had to disable TPM? (which results in a Dell screen nagging you at every reboot about this?)
as suggested on this page:
Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...
www.tonymacx86.com
In order to boot the Clover from the USB, you should visit your BIOS settings:
- "VT-d" (virtualization for directed i/o) should be disabled if possible (the config.plist includes dart=0 in case you can't do this)
- "DEP" (data execution prevention) should be enabled for OS X
- "secure boot " should be disabled
- "legacy boot" optional (recommend enabled, but boot UEFI if you have it)
- "CSM" (compatibility support module) enabled or disabled (varies) (recommend enabled, but boot UEFI)
- "fast boot" (if available) should be disabled.
- "boot from USB" or "boot from external" enabled
- SATA mode (if available) should be AHCI
- TPM should be disabled
back on the first page of this thread is the mention of following the bios setup here:
https://www.tonymacx86.com/threads/guide-dell-xps-15-9560-4k-touch-1tb-ssd-32gb-ram-100-adobergb.224486/page-44#post-1957240
www.tonymacx86.com
so I will re-enable TPM and do as the second link says...