Contribute
Register

[Guide] Dell XPS 9560 Mojave VirtualSMC, I2C Trackpad, Clover UEFI Hotpatch

Status
Not open for further replies.
thx :D
when I did run csrutil status I got Invalid Config or something like this :)

And my Handoff is working again! *yay*
I am on IOS 13.2 Beta 3 on my Phone and "Import Photo from iPhone" from Mac doesn't seem to work. Universal Clipboard and Handoff are working :)

@gaiaweylyn has the same problem. @gaiaweylyn Did you fix it?


Will try the OpenCore config on wednesday after school. Will report back when I have time. I also want to check systemconfig? If iMessage and so on are broken xD
(OpenCore supports Platforminfo/SMBIOS/ROM and so on)
Unfortunately I have yet to fix the problem on mine. There are still a couple things I can try though. The broken/missing functionality is not crucial for the time being, so after trying all the non-invasive methods I found, I decided to stop and keep things as they are rather than risk making it worse by taking extreme measures.

I'll also be building a companion desktop system soon which will natively utilize a real AirPort card, so I should be able to better troubleshoot issues with that. I'll definitely keep an eye on this thread for any further potential fixes for the laptop too.
 
Just got everything working on Catalina by using @LeLunZ Clover folder, now I’m having some issues with usb 2.0 ports on my dell TB16 but the 3.0s are working fine, in order to get Ethernet to work I only had to install this driver.

EDIT: The problem is with every usb 2.0 connected to the dock, IOReg doesn’t show any change when I plug a usb2.0 device in a 3.0 port on the dock, but 2.0 devices connected to the laptop 3.0 ports are working fine. Anyone have any clues on what could be the cause?
Anyone having the TB16 that can tell if it's working for him?
 
Anyone having the TB16 that can tell if it's working for him?

I have a TB16, afaik only power and display output work at the moment. Would love to get the USB ports working, but I have no idea how. At the moment I use a separate USB3.0 Hub connected on the right USB3.0 port on the laptop itself.
 
I have a TB16, afaik only power and display output work at the moment. Would love to get the USB ports working, but I have no idea how. At the moment I use a separate USB3.0 Hub connected on the right USB3.0 port on the laptop itself.
In fact usb3 and Ethernet (for Ethernet I needed to install drivers from the Realtek website) is working for me, the only problem is when I try to connect something to the usb2 ports or even a usb2 device to a usb3 port. I verified with other people having a genuine MacBook and it seems to be fully working, so it’s an issue with our hackintoshes
 
Anyone having the TB16 that can tell if it's working for him?
I have Ethernet working. No USBs, no audio. Would be great to have a solution for this.
 
I have Ethernet working. No USBs, no audio. Would be great to have a solution for this.
That’s strange because Ethernet is over usb3, can you try plugging an usb3 flash drive in one of the 3.0 ports in the tb16?
 
That’s strange because Ethernet is over usb3, can you try plugging an usb3 flash drive in one of the 3.0 ports in the tb16?
Actually yes! USB3 works! I guess I never tried a USB3 flash drive. USB2 devices do not work: flash drives, mouse, etc.
 
It works only if I boot without USB-C cable plugged in and plug it at Clover boot screen.
 
Actually yes! USB3 works! I guess I never tried a USB3 flash drive. USB2 devices do not work: flash drives, mouse, etc.
Ok, at least usb3 works fine
It works only if I boot without USB-C cable plugged in and plug it at Clover boot screen.
That’s normal, a workaround is disabling tb3 preboot support following instructions included in the zip file, then it should work even if booting with tb3 cable connected
 
Spent last couple of days trying to boot Sierra/El Capitan.

Clover folders attached to theme won't boot it (wrong aptiomemoryfix would cause clover to stuck and whatevergreen wouldn't get graphics working), and other options don't support trackpad gestures (particularly tap instead of click)

I've took clover folder capable of booting 10.11.6/10.12.x and added multitouch gestures support (no NVME support for 10.11 there)

Here it is in case anyone needs it.
 

Attachments

  • EFI-9560-10.11.6-10.12.x.zip
    6.1 MB · Views: 73
Status
Not open for further replies.
Back
Top