- Joined
- Jul 25, 2012
- Messages
- 23
- Motherboard
- Z390 Aorus Master
- CPU
- i9-9900K
- Graphics
- RX 5700 XT
- Mobile Phone
We have a pretty similar issue. Do you have any other graphics cards, eg Nvidia cards? If you do, you can try to install the system with that card. After the installation is complete, you can try to swap the card to the AMD one and boot into the system. I can use this method to enter the new system.
But after a few minutes(5-30), some minor glitch may happen (cursor may glitch). After that, the whole system just hangs.
My graphics card is a 5700 XT 50th Anniversary Edition.
Thanks for your reply. I used your method to installed the OS. After swapping to AMD when the installation done, everything works like charm. I also done some export test from FCPX and Davinci Resolve projects.
To get this working, I disabled Intel GPU and set Initial Display Output to PCIe slot in the BIOS, Used Whatevergreen 1.3.4 with agdpmod=pikera and Disable ATI Inject in clover graphics option.
No glitch at all.Did you encounter any glitches after swapping the GPU?
Do you mean that the agdpmod=pikera is not needed?The boot arg should not be needed with weg 1.3.4 .
Anything I tried hasn't changed. The problem continues.
Anything I tried hasn't changed. The problem continues.