Black screen after upgrade from Mojave to Catalina +++++++++++++++

[boslaw]

The first part of the installation worked fine. On reboot to clover, no matter which option I choose (install to catalina or boot to catalina) I get a black screen. I'm using HDMI cable. I've tried plugging into my Radeon RX 580 card as well as the MOBO HDMI port with the same results. I removed Whatevergreen from my kexts and updated both Clover and all kexts I previously had (all are now in kexts\other).

If I boot from clover in verbose mode, I get all +++++++++ on a black screen.

I'm using Clover 5.6.2.0
Drivers\UEFI has
apfs.efi
apfsdriverloader-64.efi
apfsdriverloader.efi

Same in drivers64uefi

Kexts\Other has:
AppleALC.kext
AtherosE2200Ethernet.kext
AtherosL1cEthernet.kext
FakeSMC_ACPISensors.kext
FakeSMC_CPUSensors.kext
FakeSMC_GPUSensors.kext
FakeSMC_LPCSensors.kext
FakeSMC_SMMSensors.kext
FakeSMC.kext
Lilu.kext
USBInjectAll.kext

Config.plist is attached

Not sure what to do next to resolve the issue.

Thanks in advance for any help you can provide.

 

[power911]

The first part of the installation worked fine. On reboot to clover, no matter which option I choose (install to catalina or boot to catalina) I get a black screen. I'm using HDMI cable. I've tried plugging into my Radeon RX 580 card as well as the MOBO HDMI port with the same results. I removed Whatevergreen from my kexts and updated both Clover and all kexts I previously had (all are now in kexts\other).

If I boot from clover in verbose mode, I get all +++++++++ on a black screen.

I'm using Clover 5.6.2.0
Drivers\UEFI has
apfs.efi
apfsdriverloader-64.efi
apfsdriverloader.efi

Same in drivers64uefi

Kexts\Other has:
AppleALC.kext
AtherosE2200Ethernet.kext
AtherosL1cEthernet.kext
FakeSMC_ACPISensors.kext
FakeSMC_CPUSensors.kext
FakeSMC_GPUSensors.kext
FakeSMC_LPCSensors.kext
FakeSMC_SMMSensors.kext
FakeSMC.kext
Lilu.kext
USBInjectAll.kext

Config.plist is attached

Not sure what to do next to resolve the issue.

Thanks in advance for any help you can provide.

The same..... Anybody??

 

[foster]

I notice No memory fix driver
Depending on motherboard you will need one of the four available
And the EC fix as well

 

[power911]

I notice No memory fix driver
Depending on motherboard you will need one of the four available
And the EC fix as well

I have Asus ROG Z390 MAXIMUS XI CODE. How to do it?

 

[boslaw]

I have these in my drivers folder:
Drivers\UEFI has
apfs.efi
apfsdriverloader-64.efi
apfsdriverloader.efi

Aren't these the memory fix drivers? These were working under Mojave

 

[boslaw]

I notice No memory fix driver

Thanks Foster - I went back and looked at the backup EFI folder on the root of my drive and realized that I did have other memory fix drivers there. I guess updating Clover deletes those drivers. My system is now up and continuing the installation. Very much appreciated.

 

[foster]

I have Asus ROG Z390 MAXIMUS XI CODE. How to do it?

Most likely use this one
OsxAptioFix2Drv-free2000.efi
Is not part of clover installer packages

 

[donw35]

use Clover 5096 or newer
only install
* drivers/UEFI
ApfsDrvierLoader.efi
OsxAptioFix3Drv.efi
the kext you have are good

 

[power911]

For now, installation process stack on:


Any ideas?

 

[power911]

Anyone??? Please.