Contribute
Register

Asus X299 - Support

Status
Not open for further replies.
New Sage bios release....2002


53dac019-4b42-4464-bdf7-10d22cf67948.jpg
 
So everything is alright, without our WIFI/BT card :D this is the last little thing,
and I feel I missed some detail, I hope I will find it tomorrow...
Now I have to go sleep a little (0:30 a.m) :)
but tomorrow I will make new .aml for this card and I hope it will work :)
Maybe some pro-Acpi master will join us and help... we will see :p

At this moment you can delete NEXTARPT.aml and use your system as always...
rest of work... we will see tomorrow, I will try to help as I can....

We will continue later to find best solution..., have a good night ;)

Finally,I received the new WIFI/BT card.

So my setup now is the next one:

WIFI/BT Card on Slot 5.


PCIe USB3.0 Card on Slot 7.

https://www.amazon.es/gp/product/B00JEVLEFQ/?tag=tonymacx86c03-21

My front USB3.0 Panel ports are connected directly to the motherboard, and my NZXT hub is connected to the rear USB3.0 port of my PCIe USB3.0 Card. And the USB2.0 of the WIFI/BT card is connected to the HUB.

So the question is:

1) Should I connect the front USB3.0 Panel ports to the PCIe card instead of to the motherboard and connect the HUB to the motherboard? Or is it OK like I have it now? Which is the best option?



Captura de pantalla 2019-10-21 a las 17.24.46.png



Looking at the image, it seems I have the pci1b73,1100 and pci14e4,43a0 cards in a wrong PCI Slot.

Do you mind to try to help me with that as you did with the Radeon VII? Thanks in advance.
 
Finally, I received the bew WIFI/BT card.

So my setup now is the next one:

WIFI/BT Card on Slot 5.


PCIe USB3.0 Card on Slot 7.

https://www.amazon.es/gp/product/B00JEVLEFQ/?tag=tonymacx86c03-21

My front USB3.0 Panel ports are connected directly to the motherboard, and my NZXT hub is connected to the rear USB3.0 port of my PCIe USB3.0 Card. And the USB2.0 of the WIFI/BT card is connected to the HUB.

So the question is:

1) Should I connect the front USB3.0 Panel ports to the PCIe card instead of to the motherboard and connect the HUB to the motherboard? Or is it OK like I have it now? Which is the best option?



View attachment 431882


Looking at the image, it seems i have the pci1b73,1100 and pci14e4,43a0 cards in a wrong PCI Slot.

Do you mind to try to help me with that as you did with the Radeon VII? Thanks in advance.

I've already mentioned a few times Front panel USB 3 to PCIe card and NZXT to Motherboard... Also it doesn't look like your drivers for the onboard USB ports is loaded 'Driver Installed' = No.
 
I've already mentioned a few times Front panel USB 3 to PCIe card and NZXT to Motherboard... Also it doesn't look like your drivers for the onboard USB ports is loaded 'Driver Installed' = No.

Yes! you're right. Now I changed the USB3.0 and connected as you said, and I have no Bluetooth because no X299 Series Chipset USB3.0 drivers installed.

So, how can I install those drivers?
 
Yes! you're right. Now I changed the USB3.0 and connected as you said, and I have no Bluetooth because no X299 Series Chipset USB3.0 drivers installed.

So, how can I install those drivers?

No drivers needed. Do you have Above 4G enabled?
 
No drivers needed. Do you have Above 4G enabled?
I guess I disable it because my system was freezing a lot. I will enable it again... thanks!

Now it seems I just have to setup the PCIe USB3.0 card and WIFI/BT to match the real Slot they are in.

Captura de pantalla 2019-10-21 a las 20.15.30.png
 
Last edited:
I guess I disable it because my system was freezing a lot. I will enable it again... thanks!

Now it seems I just have to setup the PCIe USB3.0 card and WIFI/BT to match the real Slot they are in.

View attachment 431910

You can use IOReg to check where the cards are located and update your previous SSDTs. I believe Slots 5 and 7 are under PC01-BR1A
 
You can use IOReg to check where the cards are located and update your previous SSDTs. I believe Slots 5 and 7 are under PC01-BR1A

I will try to do it by myself but I will have to read a lot ;)

Thanks again for your help!
 
Welp it's been fun but I'll be leaving the scene for now. Best of luck to everyone it's been fun!

 
Status
Not open for further replies.
Back
Top