- Joined
- Jul 13, 2019
- Messages
- 78
- Motherboard
- Asus Prime Z390-A
- CPU
- i9-9900K
- Graphics
- RX 6800XT
- Mac
- Mobile Phone
I'm hoping to get some help with my first hackintosh build. With the help of pastrychef and a EFI folder he provided, I was able to get Mojave installed but I keep running into a few consistent errors. My last few days have been: I find a thread that's similar, try the suggestions, it works for one boot and then goes right back to the same issues.
Currently, I have Clover Config 5070 running on my Mac, and when I updated it from the installer version it fixed all of my issues. I was able to shut down, computer woke up from sleeping, and it booted up just fine. I turned it off this afternoon, came back to it, and bam same issues as before. I can't get it to get past the randomseed, unless I use the installer USB. If I do that, it obviously takes me back to the Clover version that was installed, so all the other issues arise as well. I have double checked that all of the drivers are exactly the same. The only thing I've added is EmuVariableUefi.efi, because it was helping with my shut down issues.
I am simply trying to lock down these few items and it will truly be 100% running. iMessage works, hot swapping works, everything except these few critical items. I have attached a few photos of the two error screens I keep getting and my config.plist file. I'm happy to upload any additional information to help with my problems.
Thank you for your time and help!
System:
Motherboard: ASUS Prime Z390-A
Processor: i9 9900K (not overclocked)
Graphics: AMD RX570
RAM: 64GB G.Skill Trident Z 3200
Samsung 970Pro NVMe SSD (os installed on here, no issues then)
Samsung 860EVO SSD
SMBIOS: iMac 18,1
Bios:
VT-D: Disabled
CFG-Lock: Disabled
XMP II: Enabled (also have tried I)
Serial Port: Disabled
Intel Virtual Technology: Disabled
Fast Boot: Disabled
Network Stack: Disabled
XHCI Hand off: Enabled
Storage Boot Control: UEFI
OS Type: Other OS
Sata: ACHI
Currently, I have Clover Config 5070 running on my Mac, and when I updated it from the installer version it fixed all of my issues. I was able to shut down, computer woke up from sleeping, and it booted up just fine. I turned it off this afternoon, came back to it, and bam same issues as before. I can't get it to get past the randomseed, unless I use the installer USB. If I do that, it obviously takes me back to the Clover version that was installed, so all the other issues arise as well. I have double checked that all of the drivers are exactly the same. The only thing I've added is EmuVariableUefi.efi, because it was helping with my shut down issues.
I am simply trying to lock down these few items and it will truly be 100% running. iMessage works, hot swapping works, everything except these few critical items. I have attached a few photos of the two error screens I keep getting and my config.plist file. I'm happy to upload any additional information to help with my problems.
Thank you for your time and help!
System:
Motherboard: ASUS Prime Z390-A
Processor: i9 9900K (not overclocked)
Graphics: AMD RX570
RAM: 64GB G.Skill Trident Z 3200
Samsung 970Pro NVMe SSD (os installed on here, no issues then)
Samsung 860EVO SSD
SMBIOS: iMac 18,1
Bios:
VT-D: Disabled
CFG-Lock: Disabled
XMP II: Enabled (also have tried I)
Serial Port: Disabled
Intel Virtual Technology: Disabled
Fast Boot: Disabled
Network Stack: Disabled
XHCI Hand off: Enabled
Storage Boot Control: UEFI
OS Type: Other OS
Sata: ACHI