As
@Sniki and
@CoBrA2168 mention you have to config in SMBIOS and it's fine. I was a little surprised by this, as Linux and Windows 10 both knew there was only 12GB when I added the new memory without any memory listed in SMBIOS.
Same report here. Frame buffer is happy with the config you pasted, and SSDT-LED changes seem good across sleep and wake up.
Thank you guys for confirming this.
I finished the last cleanup and uploading the final changes in a few minutes.
At this point the cleanup is so big that now we only have 5 SSDTs in total which i wonder whether i should build SSDT-T440S.aml or let everyone save .dsl files as .aml and place them on patched folder.
Two things to consider are:
1. Only reason i would do this is for the sake of maintenance burden.
2. Question myself if this will bring more trouble and problem reporting by users saying XYZ is not working and the reason is they:
A) Place the .dsl files on patched folder as they are and not save them as .aml
B) Don't know how to save .dsl files as .aml
C) They forget to place one of the SSDTs
So i think it should be better to build SSDT-T440S.aml
At this point now the setup is as clean as it can possibly get therefore i don't except any big update at all.
The only possibilities that may come up are:
- When VoodooPS2 from Acidanthera is fully ready and at that point i will need to adjust SSDT-KBD to get the perfect setup for touchpads using that kext.
- After patching ALC3232 audio codec with Dock Support and in case the two extra nodes need fixes on SSDT-ALC3232
At that point a final update may come up as from now on i will start working on OpenCore.
Okay, I still have problems with the WLAN. I now have a BCM94360CS2 with adapter installed and no kexts with regard to Wifi or Bluetooth. BT works quite well, but Wifi just crashes.
In Wifi.log:
Code:
Wed Sep 11 15:49:37.006 <kernel> IO80211AssociationJoinSnapshot::captureRequestCallback Problem reported from corecapture
Wed Sep 11 15:49:37.006 <kernel> wl0: leaveModulePoweredForOffloads: Wi-Fi will stay on.
Wed Sep 11 15:49:37.006 <kernel> AirPort_Brcm43xx::syncPowerState: WWEN[disabled]
Wed Sep 11 15:49:38.502 <kernel> AirPort_Brcm43xx::platformWoWEnable: WWEN[disable], in_fatal_err[0]
Wed Sep 11 15:49:39.917 <kernel> AirPort_Brcm43xx::syncPowerState: WWEN[disabled]
Wed Sep 11 15:49:41.979 <kernel> IO80211AssociationJoinSnapshot::captureRequestCallback Problem reported from corecapture
Wed Sep 11 15:49:51.209 <kernel> AirPort_Brcm43xx::syncPowerState: WWEN[disabled]
Wed Sep 11 15:49:53.272 <kernel> IO80211AssociationJoinSnapshot::captureRequestCallback Problem reported from corecapture
Wed Sep 11 15:49:58.636 <kernel> AirPort_Brcm43xx::syncPowerState: WWEN[disabled]
Wed Sep 11 15:49:58.978 <kernel> IO80211AssociationJoinSnapshot::captureRequestCallback Problem reported from corecapture
Wed Sep 11 15:50:04.676 <kernel> IO80211VirtualInterface::controllerWillChangePowerState : Bringing down link
Wed Sep 11 15:50:04.676 <kernel> IO80211VirtualInterface::handleSIOCSIFFLAGS : Source controllerWillChangePowerState calling peerManager->disable
Wed Sep 11 15:50:04.676 <kernel> IO80211VirtualInterface::controllerWillChangePowerState : Bringing down link
Wed Sep 11 15:50:04.676 <kernel> AirPort_Brcm43xx::syncPowerState: WWEN[disabled]
Wed Sep 11 15:50:04.676 <airportd[153]> _bsd_80211_event_callback: <en1> Failed to set Per Chain Power Setting <Operation not supported>
Wed Sep 11 15:50:06.756 <kernel> IO80211AssociationJoinSnapshot::captureRequestCallback Problem reported from corecapture
Wed Sep 11 15:50:15.985 <kernel> AirPort_Brcm43xx::syncPowerState: WWEN[disabled]
Wed Sep 11 15:50:16.287 <kernel> Setting BTCoex Profile: band:8
Wed Sep 11 15:50:16.288 <kernel> Profile[0]: mode:7; desense:0; desense_level:0; chain_power_offset:<kernel> 0,<kernel> 0,<kernel> 0,<kernel> 0,<kernel>
Wed Sep 11 15:50:16.288 <kernel> Profile[1]: mode:7; desense:0; desense_level:0; chain_power_offset:<kernel> 0,<kernel> 0,<kernel> 0,<kernel> 0,<kernel>
Wed Sep 11 15:50:16.288 <kernel> Profile[2]: mode:7; desense:1; desense_level:3; chain_power_offset:<kernel> 0,<kernel> 0,<kernel> 0,<kernel> 0,<kernel>
Wed Sep 11 15:50:18.044 <kernel> IO80211AssociationJoinSnapshot::captureRequestCallback Problem reported from corecapture
Wed Sep 11 15:50:27.276 <kernel> AirPort_Brcm43xx::syncPowerState: WWEN[disabled]
Try the latest files (config.plist & SSDT-T440S.aml) and reboot.
If that doesn't fix your problem, try adding AirportBrcmFixup.kext and see if it fixes your problems.