No Audio Devices - AppleHDA Realtek Audio

[forsakenpr]

2. See The inevitable P8P67 Pro install guide... - Page 8 - OSx86 10.8 (Mountain Lion)/Krazubu

Thank you Toleda, this worked!

 

[hapa17]

Thanks in advance for having a look …

1. No audio, no audio outputs listed. I've limped this system along for a few years now (as you'll see from my specs). Everything was fine until I hit a dead end with my Nvidia GPU and High Sierra. I recently switched over to an RX 580, upgraded to Mojave, no problems. Then I did the latest update the other day, but no more sound. In the past, I would fire up Multibeast, update something like the Realtek driver, and everything would sort itself out. This time I tried installing the AppleALC through MB, tried purging other solutions, per X. in your guide, but nothing seems to kick this thing into gear.
   
   
2. MacOS 10.14.6 / GA-Z87X-UD5 TH / BIOS version F5d / i7-4770K / RX 580
   
   
3. See #1 above. My config.plist also kicks out an error when I try to load it into configurator. Haven't been able to iron that out, but it makes it impossible for me to tweak it in Configurator.
   
   
4. Attached
   
   
5. Attached
   
   
6. Attached
   
   
7. Screen shots:
   1. Attached
   2. Attached
8. Clover
   1. Attached
   2. Not installed
   3. Not installed
9. Attached

 

[toleda]

No audio

AppleHDA.kext is damaged, restore native AppleHDA.kext
config.plist is damaged, Xcode will not open it; repair
IOReg is missing
Make fixes, restart, reply with new files

 

[CezarW]

1 -No audio, no audio outputs listed. Everything was working until I upgraded to Mojave, then I wasn't able to make the Audio work anymore.
2 - MacOS 10.14.4 / GA-H270-D3H-CF / i5-7600 / AMD Radeon R9 270X
Everything else is attached as required!

Please Help!

 

[hapa17]

AppleHDA.kext is damaged, restore native AppleHDA.kext
config.plist is damaged, Xcode will not open it; repair
IOReg is missing
Make fixes, restart, reply with new files

To restore native AppleHDA.kext, I reinstalled Mojave over my current installation.
I reverted to an older config.plist backup that does load into Xcode.
Forgot to include the IOReg before. It's there now.
All things you mentioned should be fixed, all files updated and compressed below.

Thanks again for your help.

 

[toleda]

Everything was working until I upgraded to Mojave

Never installed Mojave audio.
See Mojave AppleHDA Audio

 

[toleda]

all files updated

Remove HDAEnabler1.kext wherever it is
Restart, reply with new files

 

[hapa17]

Remove HDAEnabler1.kext wherever it is
Restart, reply with new files

that worked! success! i removed HDAEnabler1.kext from my S/L/E, restarted, and sound works. thank you so much!

 

[alexgalax]

Hello! Have no sound on MSI B360M PRO-VHD. The sound used to work, then it disappeared and no longer works, need your help! MacOS 10.14.6, BIOS 7B24vA6 (latest), Intel i8400 CPU, Intel 630 GPU.
I tried all the instructions - there is no result.

 

[alexgalax]

Hello! Have no sound on MSI B360M PRO-VHD. The sound used to work, then it disappeared and no longer works, need your help! MacOS 10.14.6, BIOS 7B24vA6 (latest), Intel i8400 CPU, Intel 630 GPU.
I tried all the instructions - there is no result.

There are no input and output devices. Boot log from clover configurator attached.