[HELP] Sabertooth z87 + i7 4770k + Mojave 10.14.4 Post-Installation Issues

[mmagna]

Thx man! I will make some changes and come back to share.

 

[ironwood]

Thx man! I will make some changes and come back to share.

Definitely come back and share.

For what it's worth, these are new screen shots of the Clover EFI folders for kexts and drivers.

I updated to Clover r 5033 and the drivers are put into two folders within the drivers folder itself. I just made sure that both folders had all my drivers since Clover now is inconsistent about which folder it puts them into. One folder is "BIOS" the other is "UEFI" and that's on a UEFI-only install.

Updating to Lilu 1.3.8 and WhatEverGreen 1.3.1 really made a difference, which I did after the shots above. The pink/purple lines on startup disappeared and startup went quicker. All this on or after the install of 10.14.6 Supplemental Update.

Let me know what's going on.

 

[mmagna]

Woot! Im updating lilu and whatevergreen right now!

All i got to do is download the kexts and replace on /library/extensions?

 

[Feartech]

Woot! Im updating lilu and whatevergreen right now!

All i got to do is download the kexts and replace on /library/extensions?

How and where to install kexts:

[GUIDE] Installing 3rd Party Kexts - El Capitan, Sierra, High Sierra, Mojave, Catalina

Installing 3rd Party Kexts in /Library/Extensions Note: This guide was originally written to support MacOS Mojave and older versions (< r5200) of the Clover boot-loader. The methods detailed here are now considered legacy methods and should only used with older versions of MacOS as detailed...

www.tonymacx86.com

 

[mmagna]

Thx! I'm trying to find the kexts first. At tony we only have the older versions, 1.3.7 for lilu and 1.3.0 for wg. =/

 

[Feartech]

Thx! I'm trying to find the kexts first. At tony we only have the older versions, 1.3.7 for lilu and 1.3.0 for wg. =/

Use this to make sure your kexts are up to date:

profdrluigi / kextupdater / Downloads — Bitbucket

bitbucket.org

 

[mmagna]

Realy thx for everything! No more pink stripes and a much smoother system!

Theres only one doubt left. Why do i need to set patch usb port limit? I dont realy know that means. lol.

 

[mmagna]

@ironwood thanks for your help till now. Atm I belive everything is working but idk why my loadings are realy slow. Im using this hackingtosh to edit contents on ps/ai/pp/ae (original software) and everytime I do something, like edit, open a document, its realy slow. A 2 sec gif took me 2 minutes to render. Any idea of what can i do?

 

[ironwood]

@ironwood thanks for your help till now. Atm I belive everything is working but idk why my loadings are realy slow. Im using this hackingtosh to edit contents on ps/ai/pp/ae (original software) and everytime I do something, like edit, open a document, its realy slow. A 2 sec gif took me 2 minutes to render. Any idea of what can i do?

Sorry I’ve been out, mmagna. The port limit patch is a fix, meant to be temporary, to move past Apple’s limit on the number of ports, with USB2, one count, and USB3 as two,etc. I believe the limit is 15 ports. Many people find that USB3 won’t work without a patch or a permanent fix. Search the forums. Until then put in the 10.14 patches you see in my pictures. So my question would be: Are you using external disks over USB? If you are then you may think you’re using USB3 or C when your actually at the brutality slow USB2 speed. If internal on SATA you should be fine. Think about your hardware and the connections. I don’t think it’s macOS. I’ll write more tomorrow when I’m not on phone.

 

[mmagna]

About the usbs. I belive its ok without patchs, but I ll test the speed first.
About the slow down system. Nop, Im using a ssd for macosx and I store my files on a secoundary HD. Even when I put the file on the same ssd of the OSX its slow. I installed asmedia sata control but its not it. I dont realy know why my performance is so crap.