Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
If I recall, there should be a config plist file that is part of RehabMan's guide that enables displayport. Check the config folders where you pulled RehabMan's github and see if there are any references to "DP" instead of "HDMI"
Gonna check the guide again to see if I can find something to fix this. It's been awhile since I installed Mojave, don't remember all the steps. If I find some solution and have doubts, will ask here.

Thanks.
 
Hi !

I've stumbled upon a strange laptop :
I currently have my hands on four ProBooks 450 G2 running i5 6200u

I've tried the two 4x2 G2 profiles as well as the 4x0 G3 (Skylake) one, doesn't work :
with each profile, the laptop reboots at more or less half the loading bar on first load, and then at the mere appearance of the loading bar after subsequent reboots

the "base" config based on the generic HD520 works, but without sound / brightness control / etc

I'm at work for now, will provide my current EFI files if needed, and will as well try the clover F4 thing.
I don't know how to generate the audio codec dump

Laptop is HP ProBook 450 G2,
I5 6200U (so HD 520 - set to 128Mb in bios)
100 series chipset
15.6" 1366x768 (or something like that, the generic minimum windows 10 resolution)
Wi-Fi Intel Wireless-AC 8260 (not investing until the rest works)
some have 4G RAM, one has 8G (for now)
6th generation processor looks that your laptop is hp probook 450 g3 not g2
 
6th generation processor looks that your laptop is hp probook 450 g3 not g2

As i said in the post just below that one, the error was elseswhere : me being incapable of reading 650G2 right on a faded model number sticker.
 
what happened to Rehabman?
Unsure, and obviously should not be our concern, he is neither obligated nor payed to assist us with his own guides that he posts, he merely did so out of necessity for his work. Therefore, if there is an issue, provide problem reporting files as mentioned in Post #1 of his guide, and someone will be able to assist you in some capacity.
 
Doesn't boot, just reboots into Windows.
 
I used config_HD615_620_630_640_650.plist.
Is sleep/wake working 100 % for you.
On my 840 G5 sleep/wake works 1. time but if i afterward put it to sleep (auto,manual or lid close) i get only black screen an after aprox. 5 minutes it restarts after KP
Solved.
In Bios/Advanced/Port Options i disabled everything except Right and Left USB Ports.
I'm almost sure it was enabled Thunderbolt Type -C ports that was the problem.
As i don't have Thunderbolt devices i prefer 100 % working Sleep/Wake.
Now I'm waiting for the DW1560 to arrive
 
Last edited:
Hey, I have given up the elitebook2570p, I am using elitebook840g3, the sound is normal.
I went to applealc to find the layout-id and found that the 2570p layout-id should use 13, instead of the 12 provided by RehabMan. I have modified the aml file. Please overwrite the original file with the aml file I provided. Efi/clover/acpi/patch. You test it, then give me feedback, please also use the latest version of applealc.
Hi @y010204025! Is the SDCARD reader still working on your 2570p after installing Mojave?

--edit--
Did a clean install and SDCARD slot is not working.
 
Last edited:
"Unsure, and obviously should not be our concern...."
Me, I am worried because without RehabMan, we might be seeing the last days of hackintosh on the elitebook. Off topic, but yeah. I wish that he's just lurking around the corner (and chooses not to actively participate for whatever reason) and he's actually in good health.
 
Is sleep/wake working 100 % for you.
On my 840 G5 sleep/wake works 1. time but if i afterward put it to sleep (auto,manual or lid close) i get only black screen an after aprox. 5 minutes it restarts after KP
Solved.
In Bios/Advanced/Port Options i disabled everything except Right and Left USB Ports.
I'm almost sure it was enabled Thunderbolt Type -C ports that was the problem.
As i don't have Thunderbolt devices i prefer 100 % working Sleep/Wake.
Now I'm waiting for the DW1560 to arrive
I'm 840 G5 too. I changed the 2K screen myself. My laptop is an integrated graphics card. I put a bcm94360cs network card in the position of the sole graphics card. It is suitable to replace the original network card by connecting the adapter card. Can you share your EFI? I won't change it. Thank you.
 
Last edited:
Status
Not open for further replies.
Back
Top