Here you go...
Thanks very much for helping me out!
Just to reiterate - everything works 100% on this hack except wake from sleep (iMessage, iGPU with full acceleration, Handoff, Apple Watch login, bluetooth, lan, wifi etc. etc. all AOK) - it sleeps, but does not wake as described above.
N.B. You may notice my main GPU is present, it's a 1080Ti, I've also removed this from the PC in the past and it made no difference. (previous to Mojave, as far as High Sierra, I used Nvidia Web drivers and sleep worked AOK! Now I am forced to use HD630 )
P.S. One other thing of note, pmset -g only shows the following (I noticed if I boot from the Unibeast Pendrive that the full array of pmset options are present. However, this did not affect my issue either way):-
System-wide power settings:
Currently in use:
hibernatemode 0
womp 1
networkoversleep 0
sleep 0 (sleep prevented by nsurlsessiond, nsurlsessiond, nsurlsessiond, nsurlsessiond, UserEventAgent, sharingd)
Sleep On Power Button 1
ttyskeepawake 1
hibernatefile /var/vm/sleepimage
disksleep 10
displaysleep 10
Cheers,
Jon.
I *think* that the system is now waking (not halting) however, the displays are not initialising.Hi,
Here is the latest IORegistry.
Two things of note.
1. pmset -g now shows all the power options.
2. Boot time is quite a lot quicker!
Unfortunately the wake from sleep still fails.
however, there is no output from pmset -g log | grep -I failure
So, we have some good progress.
Keep up the good work!!
Cheers,
Jon.
Hi,
Here is the latest IORegistry.
Two things of note.
1. pmset -g now shows all the power options.
2. Boot time is quite a lot quicker!
Unfortunately the wake from sleep still fails.
however, there is no output from pmset -g log | grep -I failure
So, we have some good progress.
Keep up the good work!!
Cheers,
Jon.
I *think* that the system is now waking (not halting) however, the displays are not initialising.
It *appears* to be the same problem, but I think this is now different.
Not 100% sure tbh, just my observations.
Jon.
Yes. There are kexts installed there.Do you have kexts installed in Library/ Extensions? I see Intel Mausi Ethernet in IOReg.
@mattystonnie can you take a look at this one too please ? Thank you
Yes. There are kexts installed there.
I had to also install USBInjectAll in L/E as well as it wasn’t being picked up from the Clover/Other folder.
However, there are only the kexts you placed in C/O plus the Mausi one that I installed anyway.
Let me know it this is a problem.
P.S. the fault is different.
The system sleeps but wakes immediately at the moment.
The screen is blank, but the machine is pingable etc. I installed teamviewer and the system re-appears after wake.
Unfortunately Teamviewer is “detecting a commercial environment” and is blocking access (even though this is not commercial!) so I can’t log on to see if the system is running.
Jon.