<< Solved >> Intel UHD630 7MB

[hackintoshbala]

My build : Intel i7-8700 (non K)
Gigabyte H370M D3H
16GB RAM
Intel UHD 630 7MB
SMBIOS is iMac 18,1
Tried Whatevergreen + Lilu

No luck

EFI attached

Any help is appreciated

 

[justinhe]

Remove : config.plist/Devices/Fake ID/IntelGFX/0x3E928086, make it empty.
Remove: EFI/Clover/Kexts/other/FakePCIID_Intel_HD_Graphics.kext
Keep: Lilu.kext and whatevergreen.kext
USE: SMBIOS iMac19,2 if you have an AMD dGPU; SMBIOS Macmini8,1 if you only have intel UHD 630
Upgrade: to macOS 10.14.5 (18F132) if possible.

 

[hackintoshbala]

Fresh Install onto 10.14.5
Installed Lilu and Whatevergreen
SBIOS : Macmini8,1

Changing Device ID from 0x3E928086 to blank does not boot. (Blackscreen during OS Loading)

Attaching the EFI that currently works perfect except the Intel UHD 630 7MB

 

[UtterDisbelief]

Fresh Install onto 10.14.5
Installed Lilu and Whatevergreen
SBIOS : Macmini8,1

Changing Device ID from 0x3E928086 to blank does not boot. (Blackscreen during OS Loading)

Attaching the EFI that currently works perfect except the Intel UHD 630 7MB

Hi there.

How did you do your fresh install?

 

[hackintoshbala]

Hi there.

How did you do your fresh install?

Downloaded the update 10.14.5 on my Macbook and used Unibeast to make a bootable USB from its Install macOS Mojave.app

Formatted the SSD and reinstalled with the new version

 

[UtterDisbelief]

Downloaded the update 10.14.5 on my Macbook and used Unibeast to make a bootable USB from its Install macOS Mojave.app

Formatted the SSD and reinstalled with the new version

Sounds good

The Device ID that you are faking is actually the same as the iGPU in your CPU so in theory it isn't needed - hence the previous suggestion, I think. However if it isn't working it might be worth, first, double-checking the pre-allocated memory in your BIOS and that iGPU is set to primary display etc. then ...

Run IORegistryExplorer and check if you need to rename GFX0 to IGPU. If so you can do this using Clover Configurator to edit your config.plist. Go to the Acpi tab and look through the "List of Patches" for it.

 

[justinhe]

Fresh Install onto 10.14.5
Installed Lilu and Whatevergreen
SBIOS : Macmini8,1

Changing Device ID from 0x3E928086 to blank does not boot. (Blackscreen during OS Loading)

Attaching the EFI that currently works perfect except the Intel UHD 630 7MB

use attached config.plist

 

[hackintoshbala]

use attached config.plist

Black Screen

 

[hackintoshbala]

Sounds good

The Device ID that you are faking is actually the same as the iGPU in your CPU so in theory it isn't needed - hence the previous suggestion, I think. However if it isn't working it might be worth, first, double-checking the pre-allocated memory in your BIOS and that iGPU is set to primary display etc. then ...

Run IORegistryExplorer and check if you need to rename GFX0 to IGPU. If so you can do this using Clover Configurator to edit your config.plist. Go to the Acpi tab and look through the "List of Patches" for it.

No Luck.

Still Intel UHD 630 7MB

 

[justinhe]

Black Screen

what video ports does your mother board have? can you take a picture of the ports?