- Joined
- Feb 17, 2012
- Messages
- 41
- Motherboard
- Gigabyte Z370 AORUS Gaming 5
- CPU
- i7-8700
- Graphics
- RX 580
- Mobile Phone
I’m not sure how to word this first question but here goes; can I run MultiBeast more than once on the same build? What I’m getting at is can I run the usual MultiBeast to install the bootloader, etc. then can I run MultiBeast again later to install a single item such as an audio driver? Also, if I decide to install a different audio driver later, what will happen to the first audio driver that I had previously installed?
Second question; do I have to use the System Definition that MultiBeast defaults to or can I change it to whatever I want?
Also, if anyone can direct me to a place that explains or answers these questions, I would be most grateful.
I want to give a SHOUT-OUT to tonymacx86.com and all of the members who have been so helpful in the past. This is my third Hackintosh build done via Tonymac and I could not have done it without your help, thanks.
These are the specs for my current build in progress:
CPU - Intel Core i5-8600K
Motherboard - Gigabyte Z370 HD3P
RAM - G.Skill Aegis 16GB 2x8GB DDR4-3000 PC4-24000
Boot Drive – 512GB Samsung 950 PRO M.2 V-NAND with m.2 to PCI-E adapter.
Second question; do I have to use the System Definition that MultiBeast defaults to or can I change it to whatever I want?
Also, if anyone can direct me to a place that explains or answers these questions, I would be most grateful.
I want to give a SHOUT-OUT to tonymacx86.com and all of the members who have been so helpful in the past. This is my third Hackintosh build done via Tonymac and I could not have done it without your help, thanks.
These are the specs for my current build in progress:
CPU - Intel Core i5-8600K
Motherboard - Gigabyte Z370 HD3P
RAM - G.Skill Aegis 16GB 2x8GB DDR4-3000 PC4-24000
Boot Drive – 512GB Samsung 950 PRO M.2 V-NAND with m.2 to PCI-E adapter.